********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<count />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%/seq=%seq-num%/count

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<redirect>%interface:interface-type%</redirect>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%/seq=%seq-num%/redirect

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<sflow />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%/seq=%seq-num%/sflow

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-mirror>%interface:interface-type%</ext-mirror>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%/ext-mirror

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-redirect>%interface:interface-type%</ext-redirect>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%/ext-redirect

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-sflow />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%/ext-sflow

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip>%inet:ipv4-prefix%</src-ip><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip>%inet:ipv4-prefix%</src-ip><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip>%inet:ipv4-prefix%</src-ip><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip>%inet:ipv4-prefix%</src-ip><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip-any /><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip-any /><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip-any /><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-host>%inet:ipv4-address%</dst-ip-host><src-ip-any /><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip>%inet:ipv4-prefix%</src-ip><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip>%inet:ipv4-prefix%</src-ip><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip>%inet:ipv4-prefix%</src-ip><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip>%inet:ipv4-prefix%</src-ip><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip-any /><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip-any /><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip-any /><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip>%inet:ipv4-prefix%</dst-ip><src-ip-any /><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip-host>%inet:ipv4-address%</src-ip-host><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip>%inet:ipv4-prefix%</src-ip><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip>%inet:ipv4-prefix%</src-ip><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip>%inet:ipv4-prefix%</src-ip><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip>%inet:ipv4-prefix%</src-ip><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip-any /><dst-port>%uint32%</dst-port><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip-any /><dst-port>%uint32%</dst-port><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip-any /><dst-port-any /><src-port>%uint32%</src-port></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><native /><tag>%enumeration%</tag><dst-ip-any /><src-ip-any /><dst-port-any /><src-port-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%/ext-seq=%ext-seq-num%