********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<standard><user-acl-name>%user-acl-name-type%</user-acl-name></standard>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<seq><seq-num>%uint32%</seq-num><permit-deny>%enumeration%</permit-deny><dst-vtep-ip>%inet:ipv4-address%</dst-vtep-ip><src-vtep-ip>%inet:ipv4-address%</src-vtep-ip><vni>%uint32%</vni><vni-mask>%string%</vni-mask></seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<seq><seq-num>%uint32%</seq-num><permit-deny>%enumeration%</permit-deny><dst-vtep-ip>%inet:ipv4-address%</dst-vtep-ip><src-vtep-ip>%inet:ipv4-address%</src-vtep-ip><vni-any /></seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<seq><seq-num>%uint32%</seq-num><permit-deny>%enumeration%</permit-deny><dst-vtep-ip>%inet:ipv4-address%</dst-vtep-ip><src-vtep-ip-any /><vni>%uint32%</vni><vni-mask>%string%</vni-mask></seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<seq><seq-num>%uint32%</seq-num><permit-deny>%enumeration%</permit-deny><dst-vtep-ip>%inet:ipv4-address%</dst-vtep-ip><src-vtep-ip-any /><vni-any /></seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<seq><seq-num>%uint32%</seq-num><permit-deny>%enumeration%</permit-deny><dst-vtep-ip-any /><src-vtep-ip>%inet:ipv4-address%</src-vtep-ip><vni>%uint32%</vni><vni-mask>%string%</vni-mask></seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<seq><seq-num>%uint32%</seq-num><permit-deny>%enumeration%</permit-deny><dst-vtep-ip-any /><src-vtep-ip>%inet:ipv4-address%</src-vtep-ip><vni-any /></seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<seq><seq-num>%uint32%</seq-num><permit-deny>%enumeration%</permit-deny><dst-vtep-ip-any /><src-vtep-ip-any /><vni>%uint32%</vni><vni-mask>%string%</vni-mask></seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<seq><seq-num>%uint32%</seq-num><permit-deny>%enumeration%</permit-deny><dst-vtep-ip-any /><src-vtep-ip-any /><vni-any /></seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/standard=%user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<extended><ext-user-acl-name>%user-acl-name-type%</ext-user-acl-name></extended>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><ext-seq-num>%uint32%</ext-seq-num><ext-permit-deny>%enumeration%</ext-permit-deny><ext-dst-vtep-ip>%inet:ipv4-address%</ext-dst-vtep-ip><ext-src-vtep-ip>%inet:ipv4-address%</ext-src-vtep-ip><ext-vni>%uint32%</ext-vni><ext-vni-mask>%string%</ext-vni-mask><ext-count /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<ext-seq><ext-seq-num>%uint32%</ext-seq-num><ext-permit-deny>%enumeration%</ext-permit-deny><ext-dst-vtep-ip>%inet:ipv4-address%</ext-dst-vtep-ip><ext-src-vtep-ip>%inet:ipv4-address%</ext-src-vtep-ip><ext-vni-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><ext-seq-num>%uint32%</ext-seq-num><ext-permit-deny>%enumeration%</ext-permit-deny><ext-dst-vtep-ip>%inet:ipv4-address%</ext-dst-vtep-ip><ext-src-vtep-ip-any /><ext-vni>%uint32%</ext-vni><ext-vni-mask>%string%</ext-vni-mask><ext-count /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<ext-seq><ext-seq-num>%uint32%</ext-seq-num><ext-permit-deny>%enumeration%</ext-permit-deny><ext-dst-vtep-ip>%inet:ipv4-address%</ext-dst-vtep-ip><ext-src-vtep-ip-any /><ext-vni-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><ext-seq-num>%uint32%</ext-seq-num><ext-permit-deny>%enumeration%</ext-permit-deny><ext-dst-vtep-ip-any /><ext-src-vtep-ip>%inet:ipv4-address%</ext-src-vtep-ip><ext-vni>%uint32%</ext-vni><ext-vni-mask>%string%</ext-vni-mask><ext-count /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<ext-seq><ext-seq-num>%uint32%</ext-seq-num><ext-permit-deny>%enumeration%</ext-permit-deny><ext-dst-vtep-ip-any /><ext-src-vtep-ip>%inet:ipv4-address%</ext-src-vtep-ip><ext-vni-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ext-seq><ext-seq-num>%uint32%</ext-seq-num><ext-permit-deny>%enumeration%</ext-permit-deny><ext-dst-vtep-ip-any /><ext-src-vtep-ip-any /><ext-vni>%uint32%</ext-vni><ext-vni-mask>%string%</ext-vni-mask><ext-count /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<ext-seq><ext-seq-num>%uint32%</ext-seq-num><ext-permit-deny>%enumeration%</ext-permit-deny><ext-dst-vtep-ip-any /><ext-src-vtep-ip-any /><ext-vni-any /></ext-seq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay/access-list/type/vxlan/extended=%ext-user-acl-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<overlay-transit><user-transit-name>%user-transit-name-type%</user-transit-name></overlay-transit>"  -u admin:password https://%ipaddress%:443/restconf/data/

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<transit-overlay><access-group>%string%</access-group><in-out>%enumeration%</in-out></transit-overlay>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-vxlan-visibility:overlay-transit=%user-transit-name%