********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<groupname>%string%</groupname>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/community=%community%/groupname

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<groupname>%string%</groupname>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/user=%username%/groupname

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<user><auth>%enumeration%</auth><auth-password>%string%</auth-password></user>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/user=%username%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<user><priv>%enumeration%</priv><priv-password>%string%</priv-password></user>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/user=%username%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<encrypted />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/user=%username%/encrypted

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<udp-port>%host-port%</udp-port>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/v3host=%hostip%,%username%/udp-port

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<notifytype>%enumeration%</notifytype>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/v3host=%hostip%,%username%/notifytype

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<engineid>%string%</engineid>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/v3host=%hostip%,%username%/engineid

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<severity-level>%sev-level%</severity-level>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/v3host=%hostip%,%username%/severity-level

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<use-vrf>%use-vrf-option%</use-vrf>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/v3host=%hostip%,%username%/use-vrf

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<loopback>%intf-loopback-port-type%</loopback>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/v3host=%hostip%,%username%/source-interface/loopback

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ve>%ve-type%</ve>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/v3host=%hostip%,%username%/source-interface/ve

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<management>%mm-iftype%</management>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/v3host=%hostip%,%username%/source-interface/management

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<udp-port>%host-port%</udp-port>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/host=%ip%,%community%/udp-port

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<severity-level>%sev-level%</severity-level>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/host=%ip%,%community%/severity-level

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<use-vrf>%use-vrf-option%</use-vrf>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/host=%ip%,%community%/use-vrf

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<loopback>%intf-loopback-port-type%</loopback>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/host=%ip%,%community%/source-interface/loopback

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ve>%ve-type%</ve>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/host=%ip%,%community%/source-interface/ve

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<management>%mm-iftype%</management>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/host=%ip%,%community%/source-interface/management

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<contact>%system-contact%</contact>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/agtconfig/contact

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<location>%system-location%</location>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/agtconfig/location

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<sys-descr>%system-description%</sys-descr>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/agtconfig/sys-descr

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<trap-flag />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/enable/trap/trap-flag

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<disable-flag />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/preserve-statistics/disable/disable-flag

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<local>%snmp-engineID%</local>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/engineID-drop/engineID/local

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<group-auth-mode>%auth-mode-option%</group-auth-mode>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/group=%group-name%,%group-version%/group-auth-mode

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<read>%string%</read>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/group=%group-name%,%group-version%/read

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<write>%string%</write>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/group=%group-name%,%group-version%/write

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<notify>%string%</notify>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/group=%group-name%,%group-version%/notify

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<bfd-std-mib />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/trap/bfd-std-mib

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<snmp-vrf-shutdown />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-snmp:snmp-server/use-vrf=%use-vrf-name%/snmp-vrf-shutdown