********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<description />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/raslog/interface/description

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<console>%raslog-console%</console>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/raslog/console

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<format>%string%</format>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/format

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<secure />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/syslog-secure/secure

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<port>%uint16%</port>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/syslog-secure/port

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<udp-port>%uint16%</udp-port>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/udp-port

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<source-intf-name>%loopback-iftype%</source-intf-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/source-interface/loopback/source-intf-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<source-intf-name>%ve-iftype%</source-intf-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/source-interface/ve/source-intf-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<source-intf-name>%mm-iftype%</source-intf-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/source-interface/management/source-intf-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<format>%string%</format>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/format

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<secure />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/syslog-secure/secure

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<port>%uint16%</port>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/syslog-secure/port

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<udp-port>%uint16%</udp-port>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/udp-port

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<source-intf-name>%loopback-iftype%</source-intf-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/source-interface/loopback/source-intf-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<source-intf-name>%ve-iftype%</source-intf-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/source-interface/ve/source-intf-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<source-intf-name>%mm-iftype%</source-intf-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/source-interface/management/source-intf-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<local>%facility-enum%</local>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-facility/local

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<relp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/utility/enable/relp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<chassis-name>%string%</chassis-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:system-ras/switch-attributes/chassis-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<host-name>%string%</host-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:system-ras/switch-attributes/host-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<autoupload-param><hostip>%inet:ip-address%</hostip><username>%string%</username><directory>%string%</directory><protocol>%string%</protocol><password>%string%</password></autoupload-param>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:support/autoupload-param

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<support-param><hostip>%inet:ip-address%</hostip><username>%string%</username><directory>%string%</directory><protocol>%string%</protocol><password>%string%</password></support-param>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:support/support-param

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:support/autoupload/enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ffdc />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:support/ffdc