********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<interface><description /></interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/raslog/interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<msgId><suppress /></msgId>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/raslog/message/msgId=%msgId%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<raslog><console>%raslog-console%</console></raslog>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/raslog

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<syslog-server><format>%string%</format></syslog-server>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<syslog-secure><secure /></syslog-secure>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/syslog-secure

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<syslog-secure><port>%uint16%</port></syslog-secure>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/syslog-secure

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<syslog-server><udp-port>%uint16%</udp-port></syslog-server>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<source-interface><source-intf-type>%source-interface-type%</source-intf-type><source-intf-name>%ethernet-iftype%</source-intf-name></source-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/source-interface/ethernet

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<loopback><source-intf-name>%loopback-iftype%</source-intf-name></loopback>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/source-interface/loopback

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ve><source-intf-name>%ve-iftype%</source-intf-name></ve>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/source-interface/ve

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<management><source-intf-name>%mm-iftype%</source-intf-name></management>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server=%syslogip%,%use-vrf%/source-interface/management

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<syslog-server-host><format>%string%</format></syslog-server-host>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<syslog-secure><secure /></syslog-secure>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/syslog-secure

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<syslog-secure><port>%uint16%</port></syslog-secure>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/syslog-secure

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<syslog-server-host><udp-port>%uint16%</udp-port></syslog-server-host>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<source-interface><source-intf-type>%source-interface-type%</source-intf-type><source-intf-name>%ethernet-iftype%</source-intf-name></source-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/source-interface/ethernet

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<loopback><source-intf-name>%loopback-iftype%</source-intf-name></loopback>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/source-interface/loopback

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ve><source-intf-name>%ve-iftype%</source-intf-name></ve>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/source-interface/ve

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<management><source-intf-name>%mm-iftype%</source-intf-name></management>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-server-host=%hostname%,%use-vrf%/source-interface/management

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<syslog-facility><local>%facility-enum%</local></syslog-facility>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/syslog-facility

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<enable><relp /></enable>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:logging/utility/enable

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<switch-attributes><chassis-name>%string%</chassis-name></switch-attributes>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:system-ras/switch-attributes

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<switch-attributes><host-name>%string%</host-name></switch-attributes>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:system-ras/switch-attributes

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<autoupload-param><hostip>%inet:ip-address%</hostip><username>%string%</username><directory>%string%</directory><protocol>%string%</protocol><password>%string%</password></autoupload-param>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:support/autoupload-param

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<support-param><hostip>%inet:ip-address%</hostip><username>%string%</username><directory>%string%</directory><protocol>%string%</protocol><password>%string%</password></support-param>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:support/support-param

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<autoupload><enable /></autoupload>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:support/autoupload

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<support><ffdc /></support>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-ras:support