********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<cos-to-cos-mappings><from-cos>%cos-id-type%</from-cos><to><to-cos>%cos-id-type%</to-cos></to></cos-to-cos-mappings>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/map/cos-mutation=%name%/cos-to-cos-mappings=%from-cos%/to/cos-traffic-class

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<to-drop-precedence>%drop-precedence-id-type%</to-drop-precedence>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/map/cos-traffic-class=%name%/cos-to-tc-dp-mappings=%from-cos%/to/to-drop-precedence

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<dscp-to-dscp-mapping><dscp-in-values>%dscp-id-range-type%</dscp-in-values><to><to-value>%dscp-id-type%</to-value></to></dscp-to-dscp-mapping>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/map/dscp-mutation=%dscp-mutation-map-name%/dscp-to-dscp-mapping=%dscp-in-values%/to/dscp-traffic-class

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<to-drop-precedence>%drop-precedence-id-type%</to-drop-precedence>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/map/dscp-traffic-class=%dscp-traffic-class-map-name%/dscp-to-tc-dp-mapping=%dscp-in-values%/to/to-drop-precedence

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<red-profile><min-threshold>%int32%</min-threshold><max-threshold>%int32%</max-threshold><drop-probability>%int32%</drop-probability></red-profile>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/red-profile=%profile-id%

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<ecn>%enumeration%</ecn>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/red-profile=%profile-id%/ecn

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<tx-queue-limit>%uint32%</tx-queue-limit>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/tx-queue/tx-queue-limit

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<strict-priority><priority-number>%int32%</priority-number><scheduler-type>%enumeration%</scheduler-type><dwrr-traffic-class0>%int32%</dwrr-traffic-class0><dwrr-traffic-class1>%int32%</dwrr-traffic-class1><dwrr-traffic-class2>%int32%</dwrr-traffic-class2><dwrr-traffic-class3>%int32%</dwrr-traffic-class3><dwrr-traffic-class4>%int32%</dwrr-traffic-class4><dwrr-traffic-class5>%int32%</dwrr-traffic-class5><dwrr-traffic-class6>%int32%</dwrr-traffic-class6><dwrr-traffic-class-last>%int32%</dwrr-traffic-class-last></strict-priority>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/tx-queue/scheduler/strict-priority

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<rx-queue-limit>%uint32%</rx-queue-limit>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/rx-queue/rx-queue-limit

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<rate-percent>%rate-limit-percentage-type%</rate-percent>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:storm-control/ingress=%protocol-type%/rate-percent

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<bum-action>%enumeration%</bum-action>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:storm-control/ingress=%protocol-type%/bum-action

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<default-cos>%cos-id-type%</default-cos>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/default-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<default-tc>%traffic-class-id-type%</default-tc>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/default-tc

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<trust-cos />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/trust/trust-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<trust-dscp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/trust/trust-dscp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<remark-dscp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/remark/remark-dscp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cos-mutation>%map-name-type%</cos-mutation>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/cos-mutation

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/cos-mutation-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<traffic-class-cos>%map-name-type%</traffic-class-cos>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/traffic-class-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/traffic-class-cos-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cos-traffic-class>%map-name-type%</cos-traffic-class>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/cos-traffic-class

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/cos-traffic-class-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<traffic-class-dscp>%map-name-type%</traffic-class-dscp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/traffic-class-dscp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/traffic-class-dscp-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<dscp-mutation>%map-name-type%</dscp-mutation>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/dscp-mutation

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/dscp-mutation-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<dscp-traffic-class>%map-name-type%</dscp-traffic-class>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/dscp-traffic-class

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/dscp-traffic-class-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<dscp-cos>%map-name-type%</dscp-cos>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/dscp-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/dscp-cos-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<drop-monitor-enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/drop-monitor/drop-monitor-enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<port-speed-up>%uint32%</port-speed-up>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/port-speed-up

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<link-level-flowcontrol><flowcontrol-tx>%enumeration%</flowcontrol-tx><flowcontrol-rx>%enumeration%</flowcontrol-rx></link-level-flowcontrol>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/flowcontrol/link-level-flowcontrol

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cos-threshold><cos0-threshold>%uint32%</cos0-threshold><cos1-threshold>%uint32%</cos1-threshold><cos2-threshold>%uint32%</cos2-threshold><cos3-threshold>%uint32%</cos3-threshold><cos4-threshold>%uint32%</cos4-threshold><cos5-threshold>%uint32%</cos5-threshold><cos6-threshold>%uint32%</cos6-threshold><cos7-threshold>%uint32%</cos7-threshold></cos-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/rx-queue/cos-threshold

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<guarantee-rate>%guarantee-rate-type%</guarantee-rate>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/rx-queue/multicast/guarantee-rate

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<best-effort-rate>%best-effort-rate-type%</best-effort-rate>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-qos-mls:qos/rx-queue/multicast/best-effort-rate

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<rate-percent>%rate-limit-percentage-type%</rate-percent>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:storm-control/ingress=%protocol-type%/rate-percent

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<bum-action>%enumeration%</bum-action>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:storm-control/ingress=%protocol-type%/bum-action

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<default-cos>%cos-id-type%</default-cos>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/default-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<default-tc>%traffic-class-id-type%</default-tc>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/default-tc

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<trust-cos />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/trust/trust-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<trust-dscp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/trust/trust-dscp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<remark-dscp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/remark/remark-dscp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cos-mutation>%map-name-type%</cos-mutation>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/cos-mutation

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/cos-mutation-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<traffic-class-cos>%map-name-type%</traffic-class-cos>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/traffic-class-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/traffic-class-cos-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cos-traffic-class>%map-name-type%</cos-traffic-class>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/cos-traffic-class

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/cos-traffic-class-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<traffic-class-dscp>%map-name-type%</traffic-class-dscp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/traffic-class-dscp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/traffic-class-dscp-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<dscp-mutation>%map-name-type%</dscp-mutation>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/dscp-mutation

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/dscp-mutation-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<dscp-traffic-class>%map-name-type%</dscp-traffic-class>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/dscp-traffic-class

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/dscp-traffic-class-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<dscp-cos>%map-name-type%</dscp-cos>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/dscp-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/dscp-cos-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<drop-monitor-enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/drop-monitor/drop-monitor-enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<port-speed-up>%uint32%</port-speed-up>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/port-speed-up

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<link-level-flowcontrol><flowcontrol-tx>%enumeration%</flowcontrol-tx><flowcontrol-rx>%enumeration%</flowcontrol-rx></link-level-flowcontrol>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-qos-mls:qos/flowcontrol/link-level-flowcontrol

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<dscp-cos>%map-name-type%</dscp-cos>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-qos-mls:qos/dscp-cos

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-qos-mls:qos/dscp-cos-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<dscp-mutation>%map-name-type%</dscp-mutation>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-qos-mls:qos/dscp-mutation

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-qos-mls:qos/dscp-mutation-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<dscp-traffic-class>%map-name-type%</dscp-traffic-class>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-qos-mls:qos/dscp-traffic-class

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-qos-mls:qos/dscp-traffic-class-builtin/map-name

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<traffic-class-dscp>%map-name-type%</traffic-class-dscp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-qos-mls:qos/traffic-class-dscp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<map-name>%builtin-map-name-type%</map-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-qos-mls:qos/traffic-class-dscp-builtin/map-name