********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<port-shaper><port-shaper-rate>%shaper-rate%</port-shaper-rate><port-shaper-burst-size>%port-burst-size%</port-shaper-burst-size></port-shaper>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/brocade-qos-cpu:cpu/slot=%slot-id%/port-group/port/port-shaper

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<group-shaper><group-shaper-rate>%shaper-rate%</group-shaper-rate><group-shaper-burst-size>%burst-size%</group-shaper-burst-size></group-shaper>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/brocade-qos-cpu:cpu/slot=%slot-id%/port-group/group=%group-id%/group-config-shaper-wfq/group-shaper

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<group-wfq><group-wfq-weight>%weight-value%</group-wfq-weight></group-wfq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/brocade-qos-cpu:cpu/slot=%slot-id%/port-group/group=%group-id%/group-config-shaper-wfq/group-wfq

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<group-prio-shaper><group-prio-shaper-rate>%shaper-rate%</group-prio-shaper-rate><group-prio-shaper-burst-size>%burst-size%</group-prio-shaper-burst-size></group-prio-shaper>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/brocade-qos-cpu:cpu/slot=%slot-id%/port-group/group=%group-id%/group-config-shaper-wfq/group-prio=%group-prio-id%/group-prio-config-shaper-wfq/group-prio-shaper

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<group-prio-wfq><group-prio-wfq-weight>%weight-value%</group-prio-wfq-weight></group-prio-wfq>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/brocade-qos-cpu:cpu/slot=%slot-id%/port-group/group=%group-id%/group-config-shaper-wfq/group-prio=%group-prio-id%/group-prio-config-shaper-wfq/group-prio-wfq

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<queue-config><queue-rate>%uint32%</queue-rate></queue-config>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-qos-mls:qos/brocade-qos-cpu:cpu/slot=%slot-id%/queue-config=%queue-num%