********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<hello-interval>%uint32%</hello-interval>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/hello-interval

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<prune-wait>%uint32%</prune-wait>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/prune-wait

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<nbr-timeout>%uint16%</nbr-timeout>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/nbr-timeout

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<inactivity-timer>%uint16%</inactivity-timer>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/inactivity-timer

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<message-interval>%uint32%</message-interval>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/message-interval

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<spt-threshold>%spt-thr-type%</spt-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/spt-threshold

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ecmp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/rpf/ecmp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<rebalance />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/rpf/ecmp/rebalance

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ssm-enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/ssm-enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<range>%ip-prefix-name-t%</range>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/ssm-enable/range

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<bsr-cand-interface><bsr-cand-intf-type>%pim-intf-types%</bsr-cand-intf-type><bsr-cand-intf-id>%pim-intf-name_t%</bsr-cand-intf-id><rp-candidate /></bsr-cand-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/rp-cand-interface

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<route-precedence><uc-default>%route-precedence-type%</uc-default><uc-non-default>%route-precedence-type%</uc-non-default><none>%route-precedence-type%</none></route-precedence>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/route-precedence

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<rp-addr-prefix-list>%common-def:name-string63%</rp-addr-prefix-list>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/rp-address=%rp-ip-addr%/rp-addr-prefix-list

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<max-mcache>%uint32%</max-mcache>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:max-mcache

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<hash-mask-length>%uint16%</hash-mask-length>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:hash-mask-length

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<bsr-cand-priority>%uint32%</bsr-cand-priority>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:bsr-cand-priority

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<max-mcache>%uint32%</max-mcache>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:max-mcache

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<hash-mask-length>%uint16%</hash-mask-length>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:hash-mask-length

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<bsr-cand-priority>%uint32%</bsr-cand-priority>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:bsr-cand-priority

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-sparse />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim-sparse

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<neighbor-filter>%ip-prefix-name-t%</neighbor-filter>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim/neighbor-filter

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<dr-priority>%uint32%</dr-priority>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim/dr-priority

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ttl-threshold>%uint32%</ttl-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim/ttl-threshold

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<mcast-bdry-prefix-list>%ip-prefix-name-t%</mcast-bdry-prefix-list>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/mcast-bdry-prefix-list

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-sparse />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim-sparse

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<neighbor-filter>%ip-prefix-name-t%</neighbor-filter>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim/neighbor-filter

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<dr-priority>%uint32%</dr-priority>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim/dr-priority

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ttl-threshold>%uint32%</ttl-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim/ttl-threshold

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<mcast-bdry-prefix-list>%ip-prefix-name-t%</mcast-bdry-prefix-list>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/mcast-bdry-prefix-list

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-sparse />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim-sparse

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<neighbor-filter>%ip-prefix-name-t%</neighbor-filter>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim/neighbor-filter

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<dr-priority>%uint32%</dr-priority>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim/dr-priority

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ttl-threshold>%uint32%</ttl-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim/ttl-threshold

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<mcast-bdry-prefix-list>%ip-prefix-name-t%</mcast-bdry-prefix-list>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/mcast-bdry-prefix-list