********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><hello-interval>%uint32%</hello-interval></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><prune-wait>%uint32%</prune-wait></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><nbr-timeout>%uint16%</nbr-timeout></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><inactivity-timer>%uint16%</inactivity-timer></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><message-interval>%uint32%</message-interval></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><spt-threshold>%spt-thr-type%</spt-threshold></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<ecmp><rebalance /></ecmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/rpf/ecmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<ssm-enable><range>%ip-prefix-name-t%</range></ssm-enable>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/ssm-enable

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<route-precedence><uc-default>%route-precedence-type%</uc-default><uc-non-default>%route-precedence-type%</uc-non-default><none>%route-precedence-type%</none></route-precedence>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/route-precedence

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<anycast-rp><anycast-prefix-list>%ip-prefix-name-t%</anycast-prefix-list></anycast-rp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/anycast-rp=%anycast-ip-addr%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<rp-address><rp-addr-prefix-list>%common-def:name-string63%</rp-addr-prefix-list></rp-address>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/rp-address=%rp-ip-addr%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<max-mcache>%uint32%</max-mcache>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:max-mcache

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<hash-mask-length>%uint16%</hash-mask-length>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:hash-mask-length

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<bsr-cand-priority>%uint32%</bsr-cand-priority>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:bsr-cand-priority

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<max-mcache>%uint32%</max-mcache>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:max-mcache

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<hash-mask-length>%uint16%</hash-mask-length>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:hash-mask-length

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<bsr-cand-priority>%uint32%</bsr-cand-priority>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:bsr-cand-priority

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-int-cmd><pim-sparse /></pim-int-cmd>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><neighbor-filter>%ip-prefix-name-t%</neighbor-filter></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><dr-priority>%uint32%</dr-priority></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><ttl-threshold>%uint32%</ttl-threshold></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-int-cmd><mcast-bdry-prefix-list>%ip-prefix-name-t%</mcast-bdry-prefix-list></pim-int-cmd>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-int-cmd><pim-sparse /></pim-int-cmd>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><neighbor-filter>%ip-prefix-name-t%</neighbor-filter></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><dr-priority>%uint32%</dr-priority></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><ttl-threshold>%uint32%</ttl-threshold></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-int-cmd><mcast-bdry-prefix-list>%ip-prefix-name-t%</mcast-bdry-prefix-list></pim-int-cmd>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-int-cmd><pim-sparse /></pim-int-cmd>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><neighbor-filter>%ip-prefix-name-t%</neighbor-filter></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><dr-priority>%uint32%</dr-priority></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim><ttl-threshold>%uint32%</ttl-threshold></pim>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<pim-int-cmd><mcast-bdry-prefix-list>%ip-prefix-name-t%</mcast-bdry-prefix-list></pim-int-cmd>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd