********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<pimv6-enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-mld-snooping:mld-snooping/ipv6/pim/snooping/pimv6-enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ssmmap-enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-mld-snooping:mld-snooping/ipv6/mld/ssm-map/ssmmap-enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<vlan-pimv6-enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/ipv6/brocade-mld-snooping:mldPIM/snooping/vlan-pimv6-enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<last-member-query-interval>%lmqt-type%</last-member-query-interval>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/ipv6/brocade-mld-snooping:mldVlan/snooping/last-member-query-interval

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<query-max-response-time>%qmrt-type%</query-max-response-time>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/ipv6/brocade-mld-snooping:mldVlan/snooping/query-max-response-time

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<query-interval>%qi-type%</query-interval>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/ipv6/brocade-mld-snooping:mldVlan/snooping/query-interval

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<mldVersion>%version-type%</mldVersion>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/ipv6/brocade-mld-snooping:mldVlan/snooping/mldVersion

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/ipv6/brocade-mld-snooping:mldVlan/snooping/enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<fast-leave />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/ipv6/brocade-mld-snooping:mldVlan/snooping/fast-leave

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<qenable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/ipv6/brocade-mld-snooping:mldVlan/snooping/querier/qenable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<bd-pimv6-enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-mld-snooping:bd-pim/snooping/bd-pimv6-enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<last-member-query-interval>%lmqt-type%</last-member-query-interval>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-mld-snooping:bd-ipv6-mld/mld-snooping/last-member-query-interval

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<query-max-response-time>%qmrt-type%</query-max-response-time>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-mld-snooping:bd-ipv6-mld/mld-snooping/query-max-response-time

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<query-interval>%qi-type%</query-interval>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-mld-snooping:bd-ipv6-mld/mld-snooping/query-interval

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<mldVersion>%version-type%</mldVersion>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-mld-snooping:bd-ipv6-mld/mld-snooping/mldVersion

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-mld-snooping:bd-ipv6-mld/mld-snooping/enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<fast-leave />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-mld-snooping:bd-ipv6-mld/mld-snooping/fast-leave

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<qenable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-mld-snooping:bd-ipv6-mld/mld-snooping/querier/qenable