********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<mtu>%ip-mtu%</mtu>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/mtu

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<directed-broadcast />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/directed-broadcast

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<proxy-arp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/proxy-arp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<irdp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/irdp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<learn-any />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/arp/learn-any

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<arp-aging-timeout>%uint32%</arp-aging-timeout>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/arp-aging-timeout

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<secondary />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/address=%address%/secondary

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ospf-passive />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/address=%address%/ospf-passive

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ospf-ignore />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/address=%address%/ospf-ignore

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<unnumbered><ip-donor-interface-type>%ip-unnumbered-donor-interface-type_t%</ip-donor-interface-type><ip-donor-interface-name>%ip-unnumbered-donor-interface-name_t%</ip-donor-interface-name></unnumbered>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-ip-config:ip-config/unnumbered

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<forward />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-ip-config:ip-forward/ip/forward

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<forwarding>%common-def:vrf-name%</forwarding>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:vrf/forwarding

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<mtu>%ip-mtu%</mtu>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/mtu

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<directed-broadcast />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/directed-broadcast

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<learn-any />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/arp/learn-any

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<proxy-arp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/proxy-arp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<arp-aging-timeout>%uint32%</arp-aging-timeout>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/arp-aging-timeout

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<irdp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/irdp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<secondary />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/address=%address%/secondary

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ospf-passive />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/address=%address%/ospf-passive

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ospf-ignore />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/ip-config/address=%address%/ospf-ignore

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<forward />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip-forward/ip/forward

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<shutdown />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:shutdown

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<mtu>%ip-mtu%</mtu>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/mtu

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<directed-broadcast />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/directed-broadcast

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<irdp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/irdp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<proxy-arp />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/proxy-arp

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<learn-any />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/arp/learn-any

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<arp-aging-timeout>%uint32%</arp-aging-timeout>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/arp-aging-timeout

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<secondary />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/address=%address%/secondary

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ospf-passive />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/address=%address%/ospf-passive

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<ospf-ignore />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/address=%address%/ospf-ignore

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<unnumbered><ip-donor-interface-type>%ip-unnumbered-donor-interface-type_t%</ip-donor-interface-type><ip-donor-interface-name>%ip-unnumbered-donor-interface-name_t%</ip-donor-interface-name></unnumbered>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-ip-config:ip-config/unnumbered

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<global-ip-mtu>%ip-mtu%</global-ip-mtu>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/brocade-ip-config:ip/global-ip-mtu

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<option-disable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/brocade-ip-config:ip/option/option-disable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<icmp-fragment-enable />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/brocade-ip-config:ip/icmp-fragment/icmp-fragment-enable

curl -v -X PUT -H "Content-Type: application/yang-data+xml" -k -d "<garp-none />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/brocade-ip-config:ip/arp/gratuitous/garp-none