********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><rate-limiting>%uint32%</rate-limiting></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><echo-reply /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><redirect /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><unreachable /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><rate-limiting>%uint32%</rate-limiting></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><echo-reply /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><redirect /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><unreachable /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><rate-limiting>%uint32%</rate-limiting></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><echo-reply /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><redirect /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><unreachable /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><rate-limiting>%uint32%</rate-limiting></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><echo-reply /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><redirect /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><unreachable /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><rate-limiting>%uint32%</rate-limiting></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><echo-reply /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><redirect /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmp><unreachable /></icmp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/brocade-icmp:icmp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><rate-limiting>%uint32%</rate-limiting></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><echo-reply /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><redirect /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-icmp:icmpv6

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<icmpv6><unreachable /></icmpv6>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-icmp:icmpv6