********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<breakout><cage-mode>%connector-mode-type%</cage-mode></breakout>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/connector=%name%/breakout

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<insight><insmode /></insight>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/connector=%name%/insight

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<port-group><portgroup-speed>%portgroup-speed-type%</portgroup-speed></port-group>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/port-group=%name%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<predefined><tcam_profiletype>%tcam-profile-subtype%</tcam_profiletype></predefined>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/predefined

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cam-share><l2-ingress-acl /></cam-share>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/cam-share

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cam-share><l3-v4-ingress-acl /></cam-share>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/cam-share

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cam-share><l3-v6-ingress-acl /></cam-share>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/cam-share

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cam-share><l3-v4-pbr /></cam-share>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/cam-share

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<cam-share><l3-v6-pbr /></cam-share>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/cam-share

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<limit><l2l3v4-app>%uint32%</l2l3v4-app></limit>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/limit

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<limit><v6-app>%uint32%</v6-app></limit>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/limit

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<limit><flex-acl>%uint32%</flex-acl></limit>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam/limit

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<tcam><vxlan-vpls-enable /></tcam>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/tcam

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<predefined><route_profiletype>%route-profile-subtype%</route_profiletype></predefined>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/route/predefined

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<enhance_parameter><hwopt_enable>%feature-state-subtype%</hwopt_enable></enhance_parameter>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/route/predefined/enhance_parameter

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<enhance_parameter><multi_vrf>%feature-state-subtype%</multi_vrf></enhance_parameter>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/route/predefined/enhance_parameter

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<enhance_parameter><v4fibcomp_enable>%feature-state-subtype%</v4fibcomp_enable></enhance_parameter>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/route/predefined/enhance_parameter

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<enhance_parameter><v6fibcomp_enable>%feature-state-subtype%</v6fibcomp_enable></enhance_parameter>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/route/predefined/enhance_parameter

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<routing_parameter><maximum-paths>%ecmp-subtype%</maximum-paths></routing_parameter>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/route/routing_parameter

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<route-feature><ipv6-max-prefix-64 /></route-feature>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/route/routing_parameter/route-feature

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<route-feature><urpf /></route-feature>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/route/routing_parameter/route-feature

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<predefined><qos_profiletype>%qos-profile-subtype%</qos_profiletype></predefined>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/qos/predefined

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<predefined><lag_profiletype>%lag-profile-subtype%</lag_profiletype></predefined>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/lag/predefined

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<predefined><counters_profiletype>%counters-profile-subtype%</counters_profiletype></predefined>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/counters/predefined

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "[DO NOT USE]<predefined><etcam_profiletype>%etcam-profile-subtype%</etcam_profiletype></predefined>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-hardware:hardware/profile/etcam/predefined