********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<left-interface><left-interface-vlan>%uint32%</left-interface-vlan><left-intf-type>%erp-interface-type%</left-intf-type><left-intf-name>%erp-interface-name%</left-intf-name></left-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%/left-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<right-interface><right-interface-vlan>%uint32%</right-interface-vlan><right-intf-type>%erp-interface-type%</right-intf-type><right-intf-name>%erp-interface-name%</right-intf-name></right-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%/right-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<dot1ag-left-interface><dot1ag-left-domain-name>%string%</dot1ag-left-domain-name><dot1ag-left-ma-name>%string%</dot1ag-left-ma-name><dot1ag-left-mep>%uint32%</dot1ag-left-mep><dot1ag-left-rmep-id>%uint32%</dot1ag-left-rmep-id></dot1ag-left-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%/dot1ag-compliance/dot1ag-left-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<dot1ag-right-interface><dot1ag-right-domain-name>%string%</dot1ag-right-domain-name><dot1ag-right-ma-name>%string%</dot1ag-right-ma-name><dot1ag-right-mep>%uint32%</dot1ag-right-mep><dot1ag-right-rmep-id>%uint32%</dot1ag-right-rmep-id></dot1ag-right-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%/dot1ag-compliance/dot1ag-right-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><rpl-owner /></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><version>%uint32%</version></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><raps-mel>%uint8%</raps-mel></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><raps-default-mac /></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<sub-ring><parent-ring-id>%uint32%</parent-ring-id></sub-ring>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%/sub-ring

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><raps-propagate-tc /></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><non-revertive-mode /></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><fast-wtr-time /></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<rpl><rpl-vlan>%uint32%</rpl-vlan><rpl-intf-type>%erp-interface-type%</rpl-intf-type><rpl-intf-name>%erp-interface-name%</rpl-intf-name></rpl>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%/rpl

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<force-switch><fs-vlan>%uint32%</fs-vlan><fs-intf-type>%erp-interface-type%</fs-intf-type><fs-intf-name>%erp-interface-name%</fs-intf-name></force-switch>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%/force-switch

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><guard-time>%uint32%</guard-time></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><wtr-time>%uint32%</wtr-time></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><wtb-time>%uint32%</wtb-time></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><holdoff-time>%uint32%</holdoff-time></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><message-interval>%uint32%</message-interval></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><enable /></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<manual-switch><ms-vlan>%uint32%</ms-vlan><ms-intf-type>%erp-interface-type%</ms-intf-type><ms-intf-name>%erp-interface-name%</ms-intf-name></manual-switch>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%/manual-switch

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><name>%string%</name></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<erp><fast-convergence /></erp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-erp:erp=%erp-id%