********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<cfm />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<y1731 />"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<test-profile><test-profile>%string%</test-profile></test-profile>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<action-profile-name><action-profile-name>%string%</action-profile-name></action-profile-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<domain-name><domain-name>%string%</domain-name><domain-id>%uint32%</domain-id><domain-level>%uint32%</domain-level></domain-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<ma-name><ma-name>%string%</ma-name><ma-id>%uint32%</ma-id><ma-vlan-vid>%uint32%</ma-vlan-vid><ma-priority>%uint32%</ma-priority></ma-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<ma-name><ma-name>%string%</ma-name><ma-id>%uint32%</ma-id><ma-bd-vid>%uint32%</ma-bd-vid><ma-priority>%uint32%</ma-priority></ma-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<mep><mep-id>%uint32%</mep-id><mep-down-up>%mep-down-up-type%</mep-down-up><vlan>%uint32%</vlan><inner-vlan>%uint32%</inner-vlan><mep-intf-type>%dot1ag-interface-type%</mep-intf-type><mep-intf-name>%dot1ag-interface-name%</mep-intf-name></mep>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<remote-mep><remote-mep>%uint32%</remote-mep></remote-mep>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands/mep=%mep-id%/cfm-mep-sub-commands

curl -v -X POST -H "Content-Type: application/yang-data+xml" -k -d "<rmep-test-profile><rmep-test-profile>%string%</rmep-test-profile><mode>%y1731-profile-mode%</mode></rmep-test-profile>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands/mep=%mep-id%/cfm-mep-sub-commands/remote-mep=%remote-mep%