********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<test-profile><profile-type>%y1731-profile-type%</profile-type></test-profile>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<test-profile-params><tx-interval>%y1731-profile-tx-interval%</tx-interval></test-profile-params>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<test-profile-params><measurement-interval>%uint32%</measurement-interval></test-profile-params>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<test-profile-params><cos>%uint8%</cos></test-profile-params>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<test-profile-params><tx-frame-count>%uint32%</tx-frame-count></test-profile-params>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<test-profile-params><timeout>%uint8%</timeout></test-profile-params>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<start><start-type>%schedule-type%</start-type><start-time>%time-in-hhmmss%</start-time></start>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/start

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<start><start-periodic>%y1731-start-periodic%</start-periodic></start>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/start

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<stop><stop-type>%schedule-type%</stop-type><stop-time>%time-in-hhmmss%</stop-time></stop>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/stop

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<forward><thr-fwd-avg-value>%uint32%</thr-fwd-avg-value></forward>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/slm-threshold/forward

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<forward><thr-fwd-max-value>%uint32%</thr-fwd-max-value></forward>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/slm-threshold/forward

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<backward><thr-bwd-avg-value>%uint32%</thr-bwd-avg-value></backward>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/slm-threshold/backward

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<backward><thr-bwd-max-value>%uint32%</thr-bwd-max-value></backward>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/slm-threshold/backward

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<dmm-threshold><thr-avg-value>%uint32%</thr-avg-value></dmm-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/dmm-threshold

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<dmm-threshold><thr-max-value>%uint32%</thr-max-value></dmm-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/test-profile=%test-profile%/test-profile-params/dmm-threshold

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<ccm-up><ccm-up-actions>%action-profile-bitmap%</ccm-up-actions></ccm-up>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/action-profile-name=%action-profile-name%/event/ccm-up

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<ccm-down><ccm-down-actions>%action-profile-bitmap%</ccm-down-actions></ccm-down>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/action-profile-name=%action-profile-name%/event/ccm-down

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<avg-threshold><avg-threshold-actions>%action-profile-bitmap%</avg-threshold-actions></avg-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/action-profile-name=%action-profile-name%/event/avg-threshold

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<max-threshold><max-threshold-actions>%action-profile-bitmap%</max-threshold-actions></max-threshold>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/y1731/action-profile-name=%action-profile-name%/event/max-threshold

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<domain-name><domain-id>%uint32%</domain-id><domain-level>%uint32%</domain-level></domain-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<ma-name><ma-id>%uint32%</ma-id><ma-vlan-vid>%uint32%</ma-vlan-vid><ma-priority>%uint32%</ma-priority></ma-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<ma-name><ma-id>%uint32%</ma-id><ma-bd-vid>%uint32%</ma-bd-vid><ma-priority>%uint32%</ma-priority></ma-name>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<cfm-ma-sub-commands><ccm-interval>%ccm-interval-type%</ccm-interval></cfm-ma-sub-commands>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<cfm-ma-sub-commands><mip-policy>%mip-policy-type%</mip-policy></cfm-ma-sub-commands>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<maid-icc-format><icc-name>%string%</icc-name><umc-name>%string%</umc-name></maid-icc-format>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands/maid-icc-format

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<cfm-ma-sub-commands><maid-format>%maid-format-type%</maid-format></cfm-ma-sub-commands>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<mep><mep-down-up>%mep-down-up-type%</mep-down-up><vlan>%uint32%</vlan><inner-vlan>%uint32%</inner-vlan><mep-intf-type>%dot1ag-interface-type%</mep-intf-type><mep-intf-name>%dot1ag-interface-name%</mep-intf-name></mep>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands/mep=%mep-id%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<cfm-mep-sub-commands><tlv-type>%ccm-tlv-type%</tlv-type></cfm-mep-sub-commands>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands/mep=%mep-id%/cfm-mep-sub-commands

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<client-interface><client-intf-type>%dot1ag-interface-type%</client-intf-type><client-intf-name>%dot1ag-interface-name%</client-intf-name><csf-type>%eth-csf-type%</csf-type><tx-period>%csf-tx-period%</tx-period></client-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands/mep=%mep-id%/cfm-mep-sub-commands/client-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<remote-mep><action-profile-association>%string%</action-profile-association></remote-mep>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-dot1ag:cfm-config/protocol/cfm/domain-name=%domain-name%/ma-name=%ma-name%/cfm-ma-sub-commands/mep=%mep-id%/cfm-mep-sub-commands/remote-mep=%remote-mep%