********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<servers><server-vrf-name>%common-def:vrf-name%</server-vrf-name></servers>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-dhcpv6:interface-ve-dhcp-conf/dhcp/relay/servers=%relay-ip-addr%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<interface><interface-type>%dhcpv6-iftype%</interface-type><interface-name>%dhcpv6-ifname%</interface-name></interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-dhcpv6:interface-ve-dhcp-conf/dhcp/relay/servers=%relay-ip-addr%/interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<source-interface><source-intf-type>%dhcpv6-relay-src-interface-type%</source-intf-type><source-intf-name>%dhcpv6-src-ifname%</source-intf-name></source-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-dhcpv6:interface-ve-dhcp-conf/dhcp/relay/source-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<source-interface><source-ip>%dhcp-ipv6-address%</source-ip></source-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-dhcpv6:interface-ve-dhcp-conf/dhcp/relay/source-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<relay><maximum-delegated-prefixes>%dhcpv6-delegatedprefix%</maximum-delegated-prefixes></relay>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-dhcpv6:interface-ve-dhcp-conf/dhcp/relay

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<relay><distance>%dhcpv6-distance%</distance></relay>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ipv6-config:ipv6/brocade-dhcpv6:interface-ve-dhcp-conf/dhcp/relay

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<servers><server-vrf-name>%common-def:vrf-name%</server-vrf-name></servers>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-dhcpv6:interface-phy-dhcp-conf/dhcp/relay/servers=%relay-ip-addr%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<interface><interface-type>%dhcpv6-iftype%</interface-type><interface-name>%dhcpv6-ifname%</interface-name></interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-dhcpv6:interface-phy-dhcp-conf/dhcp/relay/servers=%relay-ip-addr%/interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<source-interface><source-intf-type>%dhcpv6-relay-src-interface-type%</source-intf-type><source-intf-name>%dhcpv6-src-ifname%</source-intf-name></source-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-dhcpv6:interface-phy-dhcp-conf/dhcp/relay/source-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<source-interface><source-ip>%dhcp-ipv6-address%</source-ip></source-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-dhcpv6:interface-phy-dhcp-conf/dhcp/relay/source-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<relay><maximum-delegated-prefixes>%dhcpv6-delegatedprefix%</maximum-delegated-prefixes></relay>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-dhcpv6:interface-phy-dhcp-conf/dhcp/relay

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<relay><distance>%dhcpv6-distance%</distance></relay>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ipv6/brocade-dhcpv6:interface-phy-dhcp-conf/dhcp/relay

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<servers><server-vrf-name>%common-def:vrf-name%</server-vrf-name></servers>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-dhcpv6:interface-po-dhcp-conf/dhcp/relay/servers=%relay-ip-addr%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<interface><interface-type>%dhcpv6-iftype%</interface-type><interface-name>%dhcpv6-ifname%</interface-name></interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-dhcpv6:interface-po-dhcp-conf/dhcp/relay/servers=%relay-ip-addr%/interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<source-interface><source-intf-type>%dhcpv6-relay-src-interface-type%</source-intf-type><source-intf-name>%dhcpv6-src-ifname%</source-intf-name></source-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-dhcpv6:interface-po-dhcp-conf/dhcp/relay/source-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<source-interface><source-ip>%dhcp-ipv6-address%</source-ip></source-interface>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-dhcpv6:interface-po-dhcp-conf/dhcp/relay/source-interface

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<relay><maximum-delegated-prefixes>%dhcpv6-delegatedprefix%</maximum-delegated-prefixes></relay>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-dhcpv6:interface-po-dhcp-conf/dhcp/relay

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<relay><distance>%dhcpv6-distance%</distance></relay>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ipv6/brocade-dhcpv6:interface-po-dhcp-conf/dhcp/relay

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<relay><maximum-delegated-prefix>%dhcpv6-system-delegatedprefix%</maximum-delegated-prefix></relay>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:ipv6/brocade-dhcpv6:dhcp/relay