********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<arp-entry><mac-address-value>%mac-access-list:mac-address-type%</mac-address-value><interfacename>%enumeration%</interfacename><Port-channel>%interface:portchannel-type%</Port-channel></arp-entry>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-arp:arp-entry=%arp-ip-address%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<arp-entry><mac-address-value>%mac-access-list:mac-address-type%</mac-address-value><interfacename>%enumeration%</interfacename><Ethernet>%interface:interface-type%</Ethernet></arp-entry>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-arp:arp-entry=%arp-ip-address%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<arp-entry><mac-address-value>%mac-access-list:mac-address-type%</mac-address-value><interfacename>%enumeration%</interfacename><Ve>%interface:ve-type%</Ve></arp-entry>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-arp:arp-entry=%arp-ip-address%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<aging-mode><conversational /></aging-mode>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-arp:host-table/aging-mode

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<aging-time><conversational-timeout>%uint32%</conversational-timeout></aging-time>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-arp:host-table/aging-time

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<suppress-arp><suppress-arp-enable /></suppress-arp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/brocade-arp:suppress-arp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<suppress-arp><suppress-arp-enable /></suppress-arp>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-bridge-domain:bridge-domain=%bridge-domain-id%,%bridge-domain-type%/brocade-arp:suppress-arp

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<arp-entry><mac-address-value>%mac-access-list:mac-address-type%</mac-address-value><interfacename>%enumeration%</interfacename><Port-channel>%interface:portchannel-type%</Port-channel></arp-entry>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-arp:arp-entry=%arp-ip-address%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<arp-entry><mac-address-value>%mac-access-list:mac-address-type%</mac-address-value><interfacename>%enumeration%</interfacename><Ethernet>%interface:interface-type%</Ethernet></arp-entry>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-arp:arp-entry=%arp-ip-address%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<arp-entry><mac-address-value>%mac-access-list:mac-address-type%</mac-address-value><interfacename>%enumeration%</interfacename><Ve>%interface:ve-type%</Ve></arp-entry>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-arp:arp-entry=%arp-ip-address%

curl -v -X PATCH -H "Content-Type: application/yang-data+xml" -k -d "<neighbor-optimization><nbr-optimization-disable /></neighbor-optimization>"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ip/brocade-arp:neighbor-optimization