******************************************************************************** * Copyright (C) 2019-2024 by Extreme Networks , Inc. * * This file is part of rcBreeze Dump * * * * Author: Pradeep Raj. * * * * * * Directions to Use: * * 1. Replace all the values enclosed in the "%" with * * the values to be configured. The string present with in the braces * * indicates its type. * * 2. To pass "" in the request replace the " with %22. * * 3. To pass multiple keys in the URI enclose seperate them with %2c or * * comma(","). * * 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could* * be defective because of the tailf extensions they have. * * * * 5. RestConf also supports Json formatting which can be obtained by simply * * updating Content-Type: application/yang-data+xml to * * Content-Type: application/yang-data+json * * * * Disclaimer: * * 1. The queries mentioned here do not have a one-to-one correlation with CLI. * * 2. The queries inferred here are based on an automated tool and are not * * gauranteed to work. Its the functional teams responsibilty to ensure its * * working. * * 3. In case if you find any discrepancy you can always contact the author to * * get it fixed. * * 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could* * be defective because of the tailf extensions they have. * ******************************************************************************** curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:nsx-controller=%name% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:nsx-controller=%name%/connection-addr curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:nsx-controller=%name%/connection-addr/address curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:nsx-controller=%name%/connection-addr/port curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:nsx-controller=%name%/connection-addr/method curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:nsx-controller=%name%/reconnect-interval curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:nsx-controller=%name%/activate curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/gw-type curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/ip curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/ip/interface curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/ip/interface/ve curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/ip/interface/ve/vrrp-extended-group curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/ip/interface/ve/fabric-virtual-gateway curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/ip/interface/loopback curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/ip/interface/loopback/loopback-id curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/map curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/map/vlan-and-bd curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/map/vlan-and-bd/vni curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/map/vlan-and-bd/vni/auto curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/map/vlan-vni-mapping=%vid% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/map/bd-vni-mapping=%bdid% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/optimized-replication curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/optimized-replication/underlay-mdt-default-group curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/optimized-replication/underlay-mdt-group=%group-ip-address%,%broadcast-domain-type% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/optimized-replication/underlay-mdt-group=%group-ip-address%,%broadcast-domain-type%/remove curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/qos-dscp-mode curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/access-lists curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/access-lists/overlay-acl-in curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/access-lists/overlay-acl-in/in-dir curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/description curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/tunnel-dst=%address% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/static=%mac-address%,%vni-num% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/extend curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/extend/vlan curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/extend/vlan/add curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/extend/vlan/remove curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/extend/bridge-domain curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/extend/bridge-domain/bd-add curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/extend/bridge-domain/bd-remove curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/mac-learning curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/mac-learning/protocol curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/bfd-enable curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/bfd curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/bfd/params curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/bfd/params/interval curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/bfd/params/interval/multiplier curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/site=%name%/shutdown curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:overlay-gateway=%name%/activate curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:ovsdb-server=%name% curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:ovsdb-server=%name%/port curl -v -X GET -H "Content-Type: application/yang-data+xml" -k -u admin:password https://%ipaddress%:443/restconf/data/brocade-tunnels:ovsdb-server=%name%/activate