********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"hello-interval\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"prune-wait\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"nbr-timeout\": \"%uint16%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"inactivity-timer\": \"%uint16%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"message-interval\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"spt-threshold\": \"%spt-thr-type%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ecmp\": {\"rebalance\": {}}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/rpf/ecmp

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ssm-enable\": {\"range\": \"%ip-prefix-name-t%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/ssm-enable

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"route-precedence\": {\"uc-default\": \"%route-precedence-type%\", \"uc-non-default\": \"%route-precedence-type%\", \"none\": \"%route-precedence-type%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/route-precedence

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"anycast-rp\": {\"anycast-prefix-list\": \"%ip-prefix-name-t%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/anycast-rp=%anycast-ip-addr%

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rp-address\": {\"rp-addr-prefix-list\": \"%common-def:name-string63%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:pim=%vrf%/rp-address=%rp-ip-addr%

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"max-mcache\": \"%uint32%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:max-mcache

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"hash-mask-length\": \"%uint16%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:hash-mask-length

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bsr-cand-priority\": \"%uint32%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-pim:bsr-cand-priority

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"max-mcache\": \"%uint32%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:max-mcache

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"hash-mask-length\": \"%uint16%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:hash-mask-length

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bsr-cand-priority\": \"%uint32%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/ipv6/router/brocade-pim:bsr-cand-priority

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim-int-cmd\": {\"pim-sparse\": {}}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"neighbor-filter\": \"%ip-prefix-name-t%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"dr-priority\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"ttl-threshold\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim-int-cmd\": {\"mcast-bdry-prefix-list\": \"%ip-prefix-name-t%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/brocade-pim:pim-intf-phy-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim-int-cmd\": {\"pim-sparse\": {}}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"neighbor-filter\": \"%ip-prefix-name-t%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"dr-priority\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"ttl-threshold\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim-int-cmd\": {\"mcast-bdry-prefix-list\": \"%ip-prefix-name-t%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/brocade-ip-config:ip/brocade-pim:pim-intf-vlan-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim-int-cmd\": {\"pim-sparse\": {}}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"neighbor-filter\": \"%ip-prefix-name-t%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"dr-priority\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim\": {\"ttl-threshold\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd/pim

curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"pim-int-cmd\": {\"mcast-bdry-prefix-list\": \"%ip-prefix-name-t%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/brocade-intf-loopback:loopback=%id%/brocade-ip-config:ip/brocade-pim:pim-intf-loopback-cont/pim-int-cmd