******************************************************************************** * Copyright (C) 2019-2024 by Extreme Networks , Inc. * * This file is part of rcBreeze Dump * * * * Author: Pradeep Raj. * * * * * * Directions to Use: * * 1. Replace all the values enclosed in the "%" with * * the values to be configured. The string present with in the braces * * indicates its type. * * 2. To pass "" in the request replace the " with %22. * * 3. To pass multiple keys in the URI enclose seperate them with %2c or * * comma(","). * * 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could* * be defective because of the tailf extensions they have. * * * * 5. RestConf also supports Json formatting which can be obtained by simply * * updating Content-Type: application/yang-data+xml to * * Content-Type: application/yang-data+json * * * * Disclaimer: * * 1. The queries mentioned here do not have a one-to-one correlation with CLI. * * 2. The queries inferred here are based on an automated tool and are not * * gauranteed to work. Its the functional teams responsibilty to ensure its * * working. * * 3. In case if you find any discrepancy you can always contact the author to * * get it fixed. * * 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could* * be defective because of the tailf extensions they have. * ******************************************************************************** curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"ospf\": {\"vrf\": \"%common-def:vrf-name%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"default-information-originate\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf% curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-sync\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf% curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"adjacency\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/log curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"bad-packet\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/log curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"neighbor\": {\"neighbor-addr\": \"%ospf-ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf% curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"connected\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/redistribute curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"static\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/redistribute curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"bgp\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/redistribute curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"redistribute-ospf\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/redistribute curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"rfc1583-compatibility\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf% curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"area\": {\"area-id\": \"%ospf-area-id%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf% curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"range\": {\"range-address\": \"%inet:ipv4-address%\", \"range-mask\": \"%inet:ipv4-address%\", \"range-effect\": \"%enumeration%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/area=%area-id% curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"virtual-link\": {\"virt-link-neighbor\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/area=%area-id% curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"distance\": {\"route-type\": \"%route-type-enum%\", \"dist-value\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf% curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"router-lsa\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/max-metric curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"external-lsa\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/max-metric/router-lsa curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"summary-lsa\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/max-metric/router-lsa curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"external-lsa-onstartup\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/max-metric/router-lsa/on-startup curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"summary-lsa-onstartup\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%/max-metric/router-lsa/on-startup curl -v -X POST -H "Content-Type: application/yang-data+json" -k -d "{\"summary-address\": {\"sum-address\": \"%ospf-ipv4-address%\", \"sum-address-mask\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/router/brocade-ospf:ospf=%vrf%