********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"mvrp-global\": {}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:protocol/brocade-mvrp:mvrp-global

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"timer\": {\"join\": \"%uint32%\", \"leave\": \"%uint32%\", \"leave-all\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:protocol/brocade-mvrp:mvrp-global/timer

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"intf-enable\": {}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-mvrp:mvrp-intf/intf-enable

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"applicant-mode\": \"%applicant-state-type%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-mvrp:mvrp-intf/applicant-mode

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"add\": \"%member-vlan-id%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-mvrp:mvrp-intf/registration-mode/forbidden/vlan/add

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"remove\": \"%member-vlan-id%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-mvrp:mvrp-intf/registration-mode/forbidden/vlan/remove

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"timer\": {\"join\": \"%uint32%\", \"leave\": \"%uint32%\", \"leave-all\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/brocade-mvrp:mvrp-intf/timer

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"intf-enable\": {}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-mvrp:mvrp-intf/intf-enable

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"applicant-mode\": \"%applicant-state-type%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-mvrp:mvrp-intf/applicant-mode

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"add\": \"%member-vlan-id%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-mvrp:mvrp-intf/registration-mode/forbidden/vlan/add

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"remove\": \"%member-vlan-id%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-mvrp:mvrp-intf/registration-mode/forbidden/vlan/remove

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"timer\": {\"join\": \"%uint32%\", \"leave\": \"%uint32%\", \"leave-all\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/brocade-mvrp:mvrp-intf/timer