******************************************************************************** * Copyright (C) 2019-2024 by Extreme Networks , Inc. * * This file is part of rcBreeze Dump * * * * Author: Pradeep Raj. * * * * * * Directions to Use: * * 1. Replace all the values enclosed in the "%" with * * the values to be configured. The string present with in the braces * * indicates its type. * * 2. To pass "" in the request replace the " with %22. * * 3. To pass multiple keys in the URI enclose seperate them with %2c or * * comma(","). * * 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could* * be defective because of the tailf extensions they have. * * * * 5. RestConf also supports Json formatting which can be obtained by simply * * updating Content-Type: application/yang-data+xml to * * Content-Type: application/yang-data+json * * * * Disclaimer: * * 1. The queries mentioned here do not have a one-to-one correlation with CLI. * * 2. The queries inferred here are based on an automated tool and are not * * gauranteed to work. Its the functional teams responsibilty to ensure its * * working. * * 3. In case if you find any discrepancy you can always contact the author to * * get it fixed. * * 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could* * be defective because of the tailf extensions they have. * ******************************************************************************** curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-xc-traps\": {\"lsp-xc-traps-enable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp-xc-traps curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"backup-retry-time\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"cspf-computation-mode\": {\"use-bypass-liberal\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/cspf-computation-mode curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"cspf-computation-mode\": {\"use-bypass-metric\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/cspf-computation-mode curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"cspf-computation-mode\": {\"ignore-overload-bit\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/cspf-computation-mode curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"cspf-computation-mode\": {\"cspf-metric-type\": \"%cspf-computation-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/cspf-computation-mode curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"cspf-group-computation\": {\"add-penalty\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/cspf-group-computation curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"cspf-interface-constraint\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"handle-isis-neighbor-down\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"handle-ospf-neighbor-down\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"retry-time\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"retry-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"rapid-retry\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"rsvp-periodic-flooding-time\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp-flooding-threshold\": {\"rsvp-flooding-threshold-down\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/rsvp-flooding-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp-flooding-threshold\": {\"rsvp-flooding-threshold-up\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/rsvp-flooding-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"soft-preemption\": {\"cleanup-timer\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/soft-preemption curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"global-auto-bandwidth\": {\"autobw-sample-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/global-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"global-auto-bandwidth\": {\"autobw-num-sample-record\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/global-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"implicit-commit\": {\"implicit-commit-all\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/implicit-commit curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"implicit-commit\": {\"implicit-commit-autobw-adjustment\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/implicit-commit curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"implicit-commit\": {\"implicit-commit-lsp-reoptimize-timer\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/implicit-commit curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"traffic-engineering\": {\"isis-set-level\": \"%enumeration%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"area\": {\"ospf-area-as-ip-address\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/traffic-engineering/traffic-eng-ospf/area curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"area\": {\"ospf-area-as-decimal\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/traffic-engineering/traffic-eng-ospf/area curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"area\": {\"ospf-area-all\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy/traffic-engineering/traffic-eng-ospf/area curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"qos-ttl-mode\": \"%enumeration%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"ingress-tunnel-accounting\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"transit-session-accounting\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"switchover-activation-delay\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"policy\": {\"switchover-hold-tear-delay\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/policy curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp\": {\"refresh-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp\": {\"refresh-multiple\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"g-refresh-reduction\": {\"summary-refresh\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp/g-refresh-reduction curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bundle-message\": {\"bundle-send-delay\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp/g-refresh-reduction/bundle-message curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"g-reliable-messaging\": {\"rapid-retrans-decay\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp/g-reliable-messaging curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"g-reliable-messaging\": {\"rapid-retrans-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp/g-reliable-messaging curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"g-reliable-messaging\": {\"rapid-retry-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp/g-reliable-messaging curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"global-rsvp-hello\": {\"global-rsvp-hello-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp/global-rsvp-hello curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"global-rsvp-hello\": {\"global-rsvp-hello-tolerance\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp/global-rsvp-hello curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp\": {\"global-rsvp-hello-acknowledgements\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp\": {\"g-rsvp-backup-bw-guarantee\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp\": {\"delay-resv-send\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/rsvp curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-ecmp\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-hello-interval-basic\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-hello-interval-target\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-hello-timeout-basic\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-hello-timeout-target\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-ka-int\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-ka-int-cnt\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-ka-timeout\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-fec-filter-in\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-fec-filter-out\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-advertise-label\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-fec-128-for-auto-discovered\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-lsr-id\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-session\": {\"ldp-session-fec-filter-out\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-session=%ldp-session-ip% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-session\": {\"ldp-session-auth-key\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-session=%ldp-session-ip% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-rcv-label-silence-time\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-gr\": {\"ldp-gr-helper-only\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-gr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-gr\": {\"ldp-gr-max-neighbor-reconnect-time\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-gr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-gr\": {\"ldp-gr-max-neighbor-recovery-time\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-gr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-gr\": {\"ldp-gr-reconnect-time\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-gr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-gr\": {\"ldp-gr-recovery-time\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-gr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-eol\": {\"ldp-eol-tx-silence\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-eol curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-eol\": {\"ldp-eol-notification\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder/ldp-eol curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-tunnel-metric\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-holder\": {\"ldp-lw-delay\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/ldp/ldp-holder curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-dynamic-bypass-sub-cmds\": {\"dynamic-bypass-max-bypasses\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/dynamic-bypass/mpls-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-dynamic-bypass-sub-cmds\": {\"dynamic-bypass-max-bypasses-per-mp\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/dynamic-bypass/mpls-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-dynamic-bypass-sub-cmds\": {\"dynamic-bypass-enable-all-interfaces\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/dynamic-bypass/mpls-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-dynamic-bypass-sub-cmds\": {\"dynamic-bypass-reoptimize-timer\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/dynamic-bypass/mpls-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-dynamic-bypass-sub-cmds\": {\"dynamic-bypass-disable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/dynamic-bypass/mpls-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface\": {\"mpls-interface-ldp-enable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-param-cmds\": {\"hello-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/ldp-params/ldp-param-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"ldp-param-cmds\": {\"hello-timeout\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/ldp-params/ldp-param-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp-reservable-bandwidth\": {\"reservable-bandwidth\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/rsvp-reservable-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp-reservable-bandwidth\": {\"reservable-bandwidth-percentage\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/rsvp-reservable-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp-authentication\": {\"rsvp-authentication-key\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/rsvp-authentication curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"interface-rsvp-hello\": {\"rsvp-hello-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-rsvp-hello curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"interface-rsvp-hello\": {\"rsvp-hello-tolerance\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-rsvp-hello curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp\": {\"rsvp-hello-disable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp\": {\"rsvp-te-metric\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp-intf-flooding-threshold\": {\"rsvp-intf-flooding-threshold-down\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/rsvp-intf-flooding-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp-intf-flooding-threshold\": {\"rsvp-intf-flooding-threshold-up\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/rsvp-intf-flooding-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"rsvp\": {\"interface-rsvp-admin-group\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"interface-refresh-reduction\": {\"summary-refresh\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-refresh-reduction curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bundle-message\": {\"bundle-send-delay\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-refresh-reduction/bundle-message curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"interface-refresh-reduction\": {\"rsvp-refresh-reduction-disable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-refresh-reduction curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"interface-reliable-messaging\": {\"rapid-retrans-decay\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-reliable-messaging curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"interface-reliable-messaging\": {\"rapid-retrans-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-reliable-messaging curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"interface-reliable-messaging\": {\"rapid-retry-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-reliable-messaging curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"interface-reliable-messaging\": {\"rsvp-reliable-messaging-disable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/rsvp/interface-reliable-messaging curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-disable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-max-bypasses\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-max-bypasses-per-mp\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-reoptimize-timer\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-cos\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-from\": \"%inet:ip-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-adaptive\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-record-route\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-hop-limit\": \"%uint8%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-exclude-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-include-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-include-all\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-primary-path\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-name-prefix\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-tie-breaking\": \"%tie-breaking%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"mpls-interface-dynamic-bypass-sub-cmds\": {\"interface-dynamic-bypass-cspf-computation-mode\": \"%cspf-computation-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"priority\": {\"interface-dynamic-bypass-setup-priority\": \"%uint32%\", \"interface-dynamic-bypass-holding-priority\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds/priority curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"traffic-eng\": {\"interface-dynamic-bypass-traffic-eng-max-burst\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds/traffic-eng curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"traffic-eng\": {\"interface-dynamic-bypass-traffic-eng-max-rate\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds/traffic-eng curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"traffic-eng\": {\"interface-dynamic-bypass-traffic-eng-mean-rate\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/mpls-interface=%interface-type%,%interface-name%/interface-dynamic-bypass/mpls-interface-dynamic-bypass-sub-cmds/traffic-eng curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"autobw-template\": {\"adjustment-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"adjustment-threshold\": {\"threshold-percentage\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name%/adjustment-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"adjustment-threshold\": {\"use-threshold-table\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name%/adjustment-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"autobw-template\": {\"min-bandwidth\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"autobw-template\": {\"max-bandwidth\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"autobw-template\": {\"overflow-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"autobw-template\": {\"underflow-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"autobw-template\": {\"mode\": \"%autobw-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"autobw-template\": {\"sample-recording\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-template=%autobw-template-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"autobw-threshold-table-bandwidth\": {\"autobw-threshold-table-threshold\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-threshold-table/autobw-threshold-table-bandwidth=%bandwidth-value% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"max-bw-threshold\": {\"max-bw-threshold-absolute\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-threshold-table/max-bw-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"max-bw-threshold\": {\"max-bw-threshold-percentage\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/autobw-threshold-table/max-bw-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"cspf-group-penalty-n\": {\"cspf-group-penalty\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/cspf-group=%cspf-group-name%/cspf-group-penalty-n curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"path-hop\": {\"path-hop-type\": \"%strict-loose-hop%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/path=%path-name%/path-hop=%path-hop-ip% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"path-insert\": {\"path-insert-type\": \"%strict-loose-hop%\", \"path-insert-before-hop-ip\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/path=%path-name%/path-insert=%path-insert-ip% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"bypass-lsp-dest-address\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"bypass-lsp-src-address\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"bypass-lsp-tie-breaking\": \"%tie-breaking%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-adaptive\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-reoptimize-timer\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-commit\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-record\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-cos\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-hop-limit\": \"%uint16%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-cspf-computation-mode\": \"%cspf-computation-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-mean-rate\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-max-rate\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-max-burst\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"priority\": {\"lsp-setup-priority\": \"%uint32%\", \"lsp-hold-priority\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name%/priority curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-exclude-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-include-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"lsp-include-all\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"bypass-lsp-primary-path\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"bypass-lsp\": {\"bypass-lsp-enable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/bypass-lsp=%bypass-lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-dest-address\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-cspf\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-ipmtu\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-metric\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-revert-timer\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-tie-breaking\": \"%tie-breaking%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-src-address\": \"%inet:ipv4-address%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-primary-path\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-adaptive\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-reoptimize-timer\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-commit\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-record\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-cos\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-hop-limit\": \"%uint16%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-cspf-computation-mode\": \"%cspf-computation-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-mean-rate\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-max-rate\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-max-burst\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"priority\": {\"lsp-setup-priority\": \"%uint32%\", \"lsp-hold-priority\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/priority curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-exclude-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-include-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-include-all\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-soft-preemption\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-auto-bandwidth\": {\"lsp-autobw-template\": \"%leafref%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-auto-bandwidth\": {\"adjustment-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"adjustment-threshold\": {\"threshold-percentage\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth/adjustment-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"adjustment-threshold\": {\"use-threshold-table\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth/adjustment-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-auto-bandwidth\": {\"min-bandwidth\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-auto-bandwidth\": {\"max-bandwidth\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-auto-bandwidth\": {\"overflow-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-auto-bandwidth\": {\"underflow-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-auto-bandwidth\": {\"mode\": \"%autobw-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-auto-bandwidth\": {\"sample-recording\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr-bandwidth\": {\"lsp-frr-bandwidth\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr/lsp-frr-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr-bandwidth\": {\"lsp-frr-bandwidth-inherit\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr/lsp-frr-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr\": {\"lsp-frr-exclude-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr\": {\"lsp-frr-include-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr\": {\"lsp-frr-include-all\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr\": {\"lsp-frr-hop-limit\": \"%uint8%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr\": {\"lsp-frr-facility-backup\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr\": {\"lsp-frr-link-protection\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr-priority\": {\"lsp-frr-setup-priority\": \"%uint32%\", \"lsp-frr-hold-priority\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr/lsp-frr-priority curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr-revertive\": {\"lsp-frr-revertive-holdtime\": \"%uint8%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr/lsp-frr-revertive curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-frr-revertive\": {\"lsp-frr-revertive-mode-global\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-frr/lsp-frr-revertive curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"secpath-standby\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"secpath-cspf\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"secpath-ipmtu\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-adaptive\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-reoptimize-timer\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-commit\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-record\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-cos\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-hop-limit\": \"%uint16%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-cspf-computation-mode\": \"%cspf-computation-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-mean-rate\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-max-rate\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-traffic-engineering\": {\"lsp-te-max-burst\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-traffic-engineering curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"priority\": {\"lsp-setup-priority\": \"%uint32%\", \"lsp-hold-priority\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/priority curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-exclude-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-include-any\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"lsp-include-all\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"secondary-path\": {\"secpath-soft-preemption\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name% curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-secpath-auto-bandwidth\": {\"lsp-secpath-autobw-template\": \"%leafref%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-secpath-auto-bandwidth\": {\"adjustment-interval\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"adjustment-threshold\": {\"threshold-percentage\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth/adjustment-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"adjustment-threshold\": {\"use-threshold-table\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth/adjustment-threshold curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-secpath-auto-bandwidth\": {\"min-bandwidth\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-secpath-auto-bandwidth\": {\"max-bandwidth\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-secpath-auto-bandwidth\": {\"overflow-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-secpath-auto-bandwidth\": {\"underflow-limit\": \"%uint32%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-secpath-auto-bandwidth\": {\"mode\": \"%autobw-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-secpath-auto-bandwidth\": {\"sample-recording\": \"%enable-disable%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/secondary-path=%secpath-name%/lsp-secpath-auto-bandwidth curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-ospf\": {\"lsp-ignore-lsp-metric\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-shortcuts/lsp-ospf curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-select-path\": {\"lsp-select-path-mode\": \"%enumeration%\", \"lsp-select-path-primary\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-select-path curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp-select-path\": {\"lsp-select-path-mode\": \"%enumeration%\", \"lsp-select-path-secondary-name\": \"%string%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%/lsp-select-path curl -v -X PATCH -H "Content-Type: application/yang-data+json" -k -d "{\"lsp\": {\"lsp-enable\": {}}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-mpls:mpls-config/router/mpls/mpls-cmds-holder/lsp=%lsp-name%