******************************************************************************** * Copyright (C) 2019-2024 by Extreme Networks , Inc. * * This file is part of rcBreeze Dump * * * * Author: Pradeep Raj. * * * * * * Directions to Use: * * 1. Replace all the values enclosed in the "%" with * * the values to be configured. The string present with in the braces * * indicates its type. * * 2. To pass "" in the request replace the " with %22. * * 3. To pass multiple keys in the URI enclose seperate them with %2c or * * comma(","). * * 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could* * be defective because of the tailf extensions they have. * * * * 5. RestConf also supports Json formatting which can be obtained by simply * * updating Content-Type: application/yang-data+xml to * * Content-Type: application/yang-data+json * * * * Disclaimer: * * 1. The queries mentioned here do not have a one-to-one correlation with CLI. * * 2. The queries inferred here are based on an automated tool and are not * * gauranteed to work. Its the functional teams responsibilty to ensure its * * working. * * 3. In case if you find any discrepancy you can always contact the author to * * get it fixed. * * 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could* * be defective because of the tailf extensions they have. * ******************************************************************************** curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"statistics\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/statistics curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"statistics-sync\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/statistics-sync curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"loop-detection\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/loop-detection curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"loop-detection-shutdown-disable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/loop-detection-shutdown-disable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"ve-config\": \"%ve-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/router-interface/ve-config curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"cee\": \"%cee-map-name-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/cee curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"loopback\": \"%enumeration%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/loopback curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"speed\": \"%enumeration%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/speed curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"fec-mode\": \"%fec-mode-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/fec/fec-mode curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"cee\": \"%cee-map-name-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/cee curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"po-speed\": \"%enumeration%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/po-speed curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"forwarding\": \"%common-def:vrf-name%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/vrf/forwarding curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"insight-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/insight/insight-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"insight-mmId\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/insight/insight-mmId curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"reload-delay-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/reload-delay/reload-delay-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"reload-delay-time\": \"%reload-delay-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/reload-delay/reload-delay-time curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"tcp_burstrate\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/tcp/tcp_burstrate curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"tcp_lockdown\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/tcp/tcp_lockdown curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"unreachable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ip/icmp/unreachable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"echo_reply\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ip/icmp/echo_reply curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"rate_limiting\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ip/icmp/rate_limiting curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"dhcp\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ip/address/dhcp curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"ip-address\": \"%common-def:ipv4-address-prefix-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ip/address/ip-address curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"v6_rate_limiting\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ipv6/icmpv6/v6_rate_limiting curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"ipv6-global-address\": \"%common-def:ipv6-address-prefix%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ipv6/ipv6-address-cont/ipv6-global-cont/ipv6-global-address curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"ipv6-global-address-eui64\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ipv6/ipv6-address-cont/ipv6-global-cont/ipv6-global-address-eui64 curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"autoconfig\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ipv6/ipv6-address-cont/autoconfig curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"dhcpv6\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/ipv6/ipv6-address-cont/dhcpv6 curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"vrf-forwarding\": \"%common-def:vrf-name%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/vrf/vrf-forwarding curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"speed\": \"%enumeration%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/speed curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"shutdown_management\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/management=%name%/shutdown_management curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"description\": \"%string%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/description curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"shutdown\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/shutdown curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"channel-group\": {\"port-int\": \"%portchannel-type%\", \"mode\": \"%po-mode%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/channel-group curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"type\": \"%po-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/channel-group/type curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"mtu\": \"%mtu-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/mtu curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"route-only\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/route-only curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"tag-type\": \"%tpid-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/tag-type curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"maintenance-mode\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/maintenance-mode curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"rate-monitoring\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/maintenance-mode/rate-monitoring curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"threshold\": \"%maint-mode-threshold%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/maintenance-mode/rate-monitoring/threshold curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"basic\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport-basic/basic curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"vlan-mode\": \"%l2-mode-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/mode/vlan-mode curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"port-security\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/port-security curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"port-sec-max\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/port-security/port-sec-max curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"port-sec-violation\": \"%port-sec-violation%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/port-security/port-sec-violation curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"sticky-flag\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/port-security/sticky/sticky-flag curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"shutdown-time\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/port-security/shutdown-time curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"accessvlan\": \"%vlan-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/access/accessvlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"all\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/trunk/allowed/vlan/all curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"none\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/trunk/allowed/vlan/none curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"add\": \"%ui32-vlan-20k-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/trunk/allowed/vlan/add curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"except\": \"%ui32-1k-vlan-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/trunk/allowed/vlan/except curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"remove\": \"%ui32-1k-vlan-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/trunk/allowed/vlan/remove curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"tag\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/trunk/tag curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"native-vlan\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/trunk/tag/native-vlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"native-vlan-id\": \"%native-vlan-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/switchport/trunk/native-vlan-classification/native-vlan-id curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"bfd-software-session\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/bfd-software-session curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"source-guard-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ip/source-guard/source-guard-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"forwarding\": \"%common-def:vrf-name%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/vrf/forwarding curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"reload-delay-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/reload-delay/reload-delay-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"reload-delay-time\": \"%reload-delay-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/reload-delay/reload-delay-time curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"interval\": {\"min-tx\": \"%bfd-tx-interval-type%\", \"min-rx\": \"%bfd-rx-interval-type%\", \"multiplier\": \"%bfd-multiplier-type%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/bfd/interval curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"bfd-shutdown\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/bfd/bfd-shutdown curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"snmp-link-disable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/snmp/trap/link-status/snmp-link-disable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"redundant-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/redundant-management/redundant-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"loop-detection-native\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/edge-loop-detection-native/loop-detection-native curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"eldshutdown-disable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/edge-loop-detection/eldshutdown-disable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"eldvlan\": \"%ui32-vlan-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/edge-loop-detection/eldvlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"priority-tag-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/priority-tag-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"strip-header\": \"%enumeration%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/strip-header curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"bpdu-drop-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/bpdu-drop-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"core-isolation-track\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/core-isolation-track curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"ethernet-segment\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ethernet-segment curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"esi\": \"%string%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ethernet-segment/esi curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"ac-influenced-df-election\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/ethernet-segment/advertise/capability/ac-influenced-df-election curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"description\": \"%string%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/description curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"vlan-name\": \"%string%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface-vlan/vlan=%name%/vlan-name curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"description\": \"%string%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/description curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"shutdown\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/shutdown curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"minimum-links\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/minimum-links curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"mtu\": \"%mtu-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/mtu curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"route-only\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/route-only curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"tag-type\": \"%tpid-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/tag-type curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"maintenance-mode\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/maintenance-mode curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"rate-monitoring\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/maintenance-mode/rate-monitoring curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"threshold\": \"%maint-mode-threshold%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/maintenance-mode/rate-monitoring/threshold curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"basic\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport-basic/basic curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"vlan-mode\": \"%l2-mode-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/mode/vlan-mode curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"port-security\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/port-security curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"port-sec-max\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/port-security/port-sec-max curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"port-sec-violation\": \"%port-sec-violation%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/port-security/port-sec-violation curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"sticky-flag\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/port-security/sticky/sticky-flag curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"shutdown-time\": \"%uint32%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/port-security/shutdown-time curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"accessvlan\": \"%vlan-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/access/accessvlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"all\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/trunk/allowed/vlan/all curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"none\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/trunk/allowed/vlan/none curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"add\": \"%ui32-vlan-20k-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/trunk/allowed/vlan/add curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"except\": \"%ui32-1k-vlan-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/trunk/allowed/vlan/except curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"remove\": \"%ui32-1k-vlan-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/trunk/allowed/vlan/remove curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"tag\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/trunk/tag curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"native-vlan\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/trunk/tag/native-vlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"native-vlan-id\": \"%native-vlan-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/switchport/trunk/native-vlan-classification/native-vlan-id curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"bfd-software-session\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/bfd-software-session curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"source-guard-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ip/source-guard/source-guard-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"snmp-link-disable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/snmp/trap/link-status/snmp-link-disable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"interval\": {\"min-tx\": \"%bfd-tx-interval-type%\", \"min-rx\": \"%bfd-rx-interval-type%\", \"multiplier\": \"%bfd-multiplier-type%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/bfd/interval curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"bfd-shutdown\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/bfd/bfd-shutdown curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"loop-detection-native\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/edge-loop-detection-native/loop-detection-native curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"eldshutdown-disable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/edge-loop-detection/eldshutdown-disable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"eldvlan\": \"%ui32-vlan-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/edge-loop-detection/eldvlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"priority-tag-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/priority-tag-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"load-balance-type\": \"%enumeration%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/load-balance-type curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"bpdu-drop-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/bpdu-drop-enable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"core-isolation-track\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/core-isolation-track curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"ethernet-segment\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ethernet-segment curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"system-id\": \"%string%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ethernet-segment/lacp/system-id curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"auto\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ethernet-segment/lacp/auto curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"esi\": \"%string%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ethernet-segment/esi curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"ac-influenced-df-election\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/port-channel=%name%/ethernet-segment/advertise/capability/ac-influenced-df-election curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"add-rspan-trunk-vlan\": \"%ui32-1k-vlan-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/rspan-vlan/add-rspan-trunk-vlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"remove-rspan-trunk-vlan\": \"%ui32-1k-vlan-range%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/rspan-vlan/remove-rspan-trunk-vlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"rspan-access-vlan\": \"%vlan-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/rspan-access/rspan-access-vlan curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"channel\": \"%tunable-optics-sfpp-channel-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/ethernet=%name%/tunable-optics/sfpp/channel curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"description\": \"%string%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/description curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"interval\": {\"min-tx\": \"%bfd-tx-interval-type%\", \"min-rx\": \"%bfd-rx-interval-type%\", \"multiplier\": \"%bfd-multiplier-type%\"}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/bfd/interval curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"bfd-shutdown\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/bfd/bfd-shutdown curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"snmp-link-disable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-common-def:routing-system/brocade-interface:interface/ve=%name%/snmp/trap/link-status/snmp-link-disable curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"global-l2-mtu\": \"%mtu-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/global-l2-mtu curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"global-l2-bpdu\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/global-l2-bpdu curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"global-reload-delay\": \"%reload-delay-type%\"}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/global-reload-delay curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"ingress-vlan-mapped-ve-counter\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/ingress-vlan-mapped-ve-counter curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"tunneled-arp-trap-enable\": {}}" -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:global-mtu-conf/tunneled-arp-trap/tunneled-arp-trap-enable