********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rcBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* 5. RestConf also supports Json formatting which can be obtained by simply    *
*    updating Content-Type: application/yang-data+xml to                       *
*    Content-Type: application/yang-data+json                                  * 
*                                                                              * 

* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************
curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"ip\": {}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/mode/gre/ip

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"source-address\": \"%inet:ipv4-address%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/gre-source/source-address

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"interface-loopback\": \"%lo:intf-loopback-port-type%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/gre-source/interface-loopback

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"interface-ethernet\": \"%interface:interface-type%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/gre-source/interface-ethernet

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"interface-ve\": \"%uint32%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/gre-source/interface-ve

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"tunnel-destination\": \"%inet:ipv4-address%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/tunnel-destination

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"tunnel-shutdown\": {}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/tunnel-shutdown

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"router-ve\": \"%uint32%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/tunnel-router-interface/router-ve

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"gre-ttl\": \"%uint32%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/gre-ttl

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"gre-dscp\": \"%uint32%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/gre-dscp

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "[DO NOT USE]{\"tunnel-name\": \"%string%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/tunnel-name

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"dscp-ttl-mode\": \"%enumeration%\"}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/dscp-ttl-mode

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"statistics\": {}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/statistics

curl -v -X PUT -H "Content-Type: application/yang-data+json" -k -d "{\"keepalive\": {\"time-interval\": \"%uint32%\", \"retry-count\": \"%uint32%\"}}"  -u admin:password https://%ipaddress%:443/restconf/data/brocade-interface:interface/brocade-gre-vxlan:tunnel=%identifier%/keepalive