********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************

curl -v -X PUT -d "<database-overflow-interval>%common-def:time-interval-sec%</database-overflow-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/database-overflow-interval


curl -v -X PUT -d "<default-information-originate />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/default-information-originate


curl -v -X PUT -d "<always>true</always>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/default-information-originate/always


curl -v -X PUT -d "<metric>%uint32%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/default-information-originate/metric


curl -v -X PUT -d "<metric-type>%metric-type%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/default-information-originate/metric-type


curl -v -X PUT -d "<route-map>%string%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/default-information-originate/route-map


curl -v -X PUT -d "<default-passive-interface>true</default-passive-interface>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/default-passive-interface


curl -v -X PUT -d "<default-metric>%uint32%</default-metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/default-metric


curl -v -X PUT -d "<ldp-sync />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/ldp-sync


curl -v -X PUT -d "<hold-down>%uint32%</hold-down>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/ldp-sync/hold-down


curl -v -X PUT -d "<external-lsdb-limit>%uint32%</external-lsdb-limit>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/external-lsdb-limit


curl -v -X PUT -d "<adjacency />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/log/adjacency


curl -v -X PUT -d "<dr-only>true</dr-only>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/log/adjacency/dr-only


curl -v -X PUT -d "<all>true</all>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/log/all


curl -v -X PUT -d "<bad-packet />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/log/bad-packet


curl -v -X PUT -d "<checksum>true</checksum>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/log/bad-packet/checksum


curl -v -X PUT -d "<database>true</database>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/log/database


curl -v -X PUT -d "<retransmit>true</retransmit>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/log/retransmit


curl -v -X PUT -d "<metric-type>%metric-type%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/metric-type


curl -v -X PUT -d "<connected />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/connected


curl -v -X PUT -d "<route-map>%common-def:name-string63%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/connected/route-map


curl -v -X PUT -d "<static />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/static


curl -v -X PUT -d "<route-map>%common-def:name-string63%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/static/route-map


curl -v -X PUT -d "<bgp />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/bgp


curl -v -X PUT -d "<route-map>%common-def:name-string63%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/bgp/route-map


curl -v -X PUT -d "<ospf />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/ospf


curl -v -X PUT -d "<route-map>%common-def:name-string63%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/ospf/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/isis/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/isis/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/isis/level-1-2


curl -v -X PUT -d "<route-map>%common-def:name-string63%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/redistribute/isis/route-map


curl -v -X PUT -d "<rfc1583-compatibility />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/rfc1583-compatibility


curl -v -X PUT -d "<rfc1583-compatibility-flag>true</rfc1583-compatibility-flag>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/rfc1583-compatibility/rfc1583-compatibility-flag


curl -v -X PUT -d "<normal>true</normal>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/normal


curl -v -X PUT -d "<nssa-value>%big-metric%</nssa-value>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/nssa/nssa-value


curl -v -X PUT -d "<no-summary>true</no-summary>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/nssa/no-summary


curl -v -X PUT -d "<default-information-originate>true</default-information-originate>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/nssa/default-information-originate


curl -v -X PUT -d "<stub-value>%big-metric%</stub-value>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/stub/stub-value


curl -v -X PUT -d "<no-summary>true</no-summary>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/stub/no-summary


curl -v -X PUT -d "<cost>%range-metric%</cost>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/range/%range-address%/%range-mask%/cost


curl -v -X PUT -d "<prefix-list><prefix-list>%ipv4-prefix-name-t%</prefix-list><in>true</in></prefix-list>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/prefix-list


curl -v -X PUT -d "<prefix-list><prefix-list>%ipv4-prefix-name-t%</prefix-list><out>true</out></prefix-list>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/prefix-list


curl -v -X PUT -d "<no-encrypt-auth-key>%ospf-auth-psswd-string%</no-encrypt-auth-key>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/virtual-link/%virt-link-neighbor%/authentication-key/no-encrypt-auth-key


curl -v -X PUT -d "<key-chain>%ospf-keychain-string%</key-chain>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/virtual-link/%virt-link-neighbor%/authentication/key-chain


curl -v -X PUT -d "<hello-interval>%common-def:time-interval-sec%</hello-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/virtual-link/%virt-link-neighbor%/hello-interval


curl -v -X PUT -d "<dead-interval>%common-def:time-interval-sec%</dead-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/virtual-link/%virt-link-neighbor%/dead-interval


curl -v -X PUT -d "<retransmit-interval>%common-def:time-interval-sec%</retransmit-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/virtual-link/%virt-link-neighbor%/retransmit-interval


curl -v -X PUT -d "<transmit-delay>%common-def:time-interval-sec%</transmit-delay>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/virtual-link/%virt-link-neighbor%/transmit-delay


curl -v -X PUT -d "<key-activation-wait-time>%common-def:time-interval-sec%</key-activation-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/virtual-link/%virt-link-neighbor%/md5-authentication/key-activation-wait-time


curl -v -X PUT -d "<key-id><key-id>%uint32%</key-id><key>%ospf-auth-psswd-string%</key></key-id>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/area/%area-id%/virtual-link/%virt-link-neighbor%/md5-authentication/key-id


curl -v -X PUT -d "<ref-bandwidth>%band-width%</ref-bandwidth>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/auto-cost/reference-bandwidth/ref-bandwidth


curl -v -X PUT -d "<use-active-ports>true</use-active-ports>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/auto-cost/reference-bandwidth/use-active-ports


curl -v -X PUT -d "<route-map><route-map>%common-def:name-string63%</route-map><in>true</in></route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/distribute-list/route-map


curl -v -X PUT -d "<router-lsa />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa


curl -v -X PUT -d "<all-vrfs>true</all-vrfs>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/all-vrfs


curl -v -X PUT -d "<all-lsas>true</all-lsas>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/all-lsas


curl -v -X PUT -d "<external-lsa />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/external-lsa


curl -v -X PUT -d "<external-lsa-val>%uint32%</external-lsa-val>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/external-lsa/external-lsa-val


curl -v -X PUT -d "<summary-lsa />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/summary-lsa


curl -v -X PUT -d "<summary-lsa-val>%uint32%</summary-lsa-val>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/summary-lsa/summary-lsa-val


curl -v -X PUT -d "<all>true</all>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/link/all


curl -v -X PUT -d "<ptp>true</ptp>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/link/ptp


curl -v -X PUT -d "<stub>true</stub>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/link/stub


curl -v -X PUT -d "<transit>true</transit>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/link/transit


curl -v -X PUT -d "<time>%uint32%</time>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/time


curl -v -X PUT -d "<wait-for-bgp>true</wait-for-bgp>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/wait-for-bgp


curl -v -X PUT -d "<all-lsas>true</all-lsas>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/all-lsas


curl -v -X PUT -d "<external-lsa />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/external-lsa


curl -v -X PUT -d "<external-lsa-val-onstartup>%uint32%</external-lsa-val-onstartup>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/external-lsa/external-lsa-val-onstartup


curl -v -X PUT -d "<summary-lsa />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/summary-lsa


curl -v -X PUT -d "<summary-lsa-val-onstartup>%uint32%</summary-lsa-val-onstartup>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/summary-lsa/summary-lsa-val-onstartup


curl -v -X PUT -d "<all>true</all>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/link/all


curl -v -X PUT -d "<ptp>true</ptp>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/link/ptp


curl -v -X PUT -d "<stub>true</stub>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/link/stub


curl -v -X PUT -d "<transit>true</transit>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/max-metric/router-lsa/on-startup/link/transit


curl -v -X PUT -d "<lsa-group-pacing>%common-def:time-interval-sec%</lsa-group-pacing>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/timers/lsa-group-pacing


curl -v -X PUT -d "<spf><init-delay>%common-def:time-interval-msec%</init-delay><hold-time>%common-def:time-interval-msec%</hold-time><max-hold-time>%common-def:time-interval-msec%</max-hold-time></spf>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/timers/throttle/spf


curl -v -X PUT -d "<vrf-lite-capability>true</vrf-lite-capability>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/vrf-lite-capability


curl -v -X PUT -d "<graceful-restart-enable>true</graceful-restart-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/graceful-restart/graceful-restart-enable


curl -v -X PUT -d "<helper-disable>true</helper-disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/graceful-restart/helper-disable


curl -v -X PUT -d "<restart-time>%common-def:time-interval-sec%</restart-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/graceful-restart/restart-time


curl -v -X PUT -d "<nonstop-routing>true</nonstop-routing>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/nonstop-routing


curl -v -X PUT -d "<maximum-paths>%uint8%</maximum-paths>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/maximum-paths


curl -v -X PUT -d "<bfd-enable>true</bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/bfd/bfd-enable


curl -v -X PUT -d "<holdover-interval>%uint8%</holdover-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/bfd/holdover-interval


curl -v -X PUT -d "<auth-transition>true</auth-transition>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/ospf/%vrf%/auth-transition


curl -v -X PUT -d "[DO NOT USE]<area>%ospf-area-id%</area>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/area


curl -v -X PUT -d "<auth-change-wait-time>%common-def:time-interval-sec%</auth-change-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/auth-change-wait-time


curl -v -X PUT -d "[DO NOT USE]<no-encrypt-auth-key>%ospf-auth-psswd-string%</no-encrypt-auth-key>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/authentication-key/no-encrypt-auth-key


curl -v -X PUT -d "[DO NOT USE]<key-chain>%ospf-keychain-string%</key-chain>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/authentication/key-chain


curl -v -X PUT -d "<hello-interval>%common-def:time-interval-sec%</hello-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/hello-interval


curl -v -X PUT -d "<dead-interval>%common-def:time-interval-sec%</dead-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/dead-interval


curl -v -X PUT -d "<retransmit-interval>%common-def:time-interval-sec%</retransmit-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/retransmit-interval


curl -v -X PUT -d "<transmit-delay>%common-def:time-interval-sec%</transmit-delay>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/transmit-delay


curl -v -X PUT -d "<key-activation-wait-time>%common-def:time-interval-sec%</key-activation-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/md5-authentication/key-activation-wait-time


curl -v -X PUT -d "[DO NOT USE]<key-id><key-id>%uint32%</key-id><key>%ospf-auth-psswd-string%</key></key-id>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/md5-authentication/key-id


curl -v -X PUT -d "<cost>%uint32%</cost>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/cost


curl -v -X PUT -d "<network>%enumeration%</network>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/network


curl -v -X PUT -d "<ldp-sync>%enumeration%</ldp-sync>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/ldp-sync


curl -v -X PUT -d "<all-out>true</all-out>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/database-filter/all-out


curl -v -X PUT -d "<all-external>%database-filter-options%</all-external>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/database-filter/all-external


curl -v -X PUT -d "<all-summary-external>%database-filter-options%</all-summary-external>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/database-filter/all-summary-external


curl -v -X PUT -d "<mtu-ignore>true</mtu-ignore>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/mtu-ignore


curl -v -X PUT -d "<active>true</active>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/active


curl -v -X PUT -d "<passive>true</passive>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/passive


curl -v -X PUT -d "<priority>%uint32%</priority>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/priority


curl -v -X PUT -d "<intf-bfd-enable>true</intf-bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/ospf/bfd/intf-bfd-enable


curl -v -X PUT -d "[DO NOT USE]<area>%ospf-area-id%</area>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/area


curl -v -X PUT -d "<auth-change-wait-time>%common-def:time-interval-sec%</auth-change-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/auth-change-wait-time


curl -v -X PUT -d "[DO NOT USE]<no-encrypt-auth-key>%ospf-auth-psswd-string%</no-encrypt-auth-key>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/authentication-key/no-encrypt-auth-key


curl -v -X PUT -d "[DO NOT USE]<key-chain>%ospf-keychain-string%</key-chain>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/authentication/key-chain


curl -v -X PUT -d "<hello-interval>%common-def:time-interval-sec%</hello-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/hello-interval


curl -v -X PUT -d "<dead-interval>%common-def:time-interval-sec%</dead-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/dead-interval


curl -v -X PUT -d "<retransmit-interval>%common-def:time-interval-sec%</retransmit-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/retransmit-interval


curl -v -X PUT -d "<transmit-delay>%common-def:time-interval-sec%</transmit-delay>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/transmit-delay


curl -v -X PUT -d "<key-activation-wait-time>%common-def:time-interval-sec%</key-activation-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/md5-authentication/key-activation-wait-time


curl -v -X PUT -d "[DO NOT USE]<key-id><key-id>%uint32%</key-id><key>%ospf-auth-psswd-string%</key></key-id>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/md5-authentication/key-id


curl -v -X PUT -d "<cost>%uint32%</cost>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/cost


curl -v -X PUT -d "<network>%enumeration%</network>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/network


curl -v -X PUT -d "<ldp-sync>%enumeration%</ldp-sync>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/ldp-sync


curl -v -X PUT -d "<all-out>true</all-out>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/database-filter/all-out


curl -v -X PUT -d "<all-external>%database-filter-options%</all-external>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/database-filter/all-external


curl -v -X PUT -d "<all-summary-external>%database-filter-options%</all-summary-external>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/database-filter/all-summary-external


curl -v -X PUT -d "<mtu-ignore>true</mtu-ignore>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/mtu-ignore


curl -v -X PUT -d "<active>true</active>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/active


curl -v -X PUT -d "<passive>true</passive>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/passive


curl -v -X PUT -d "<priority>%uint32%</priority>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/priority


curl -v -X PUT -d "<intf-bfd-enable>true</intf-bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/ospf/bfd/intf-bfd-enable


curl -v -X PUT -d "[DO NOT USE]<area>%ospf-area-id%</area>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/area


curl -v -X PUT -d "<auth-change-wait-time>%common-def:time-interval-sec%</auth-change-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/auth-change-wait-time


curl -v -X PUT -d "[DO NOT USE]<no-encrypt-auth-key>%ospf-auth-psswd-string%</no-encrypt-auth-key>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/authentication-key/no-encrypt-auth-key


curl -v -X PUT -d "[DO NOT USE]<key-chain>%ospf-keychain-string%</key-chain>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/authentication/key-chain


curl -v -X PUT -d "<hello-interval>%common-def:time-interval-sec%</hello-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/hello-interval


curl -v -X PUT -d "<dead-interval>%common-def:time-interval-sec%</dead-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/dead-interval


curl -v -X PUT -d "<retransmit-interval>%common-def:time-interval-sec%</retransmit-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/retransmit-interval


curl -v -X PUT -d "<transmit-delay>%common-def:time-interval-sec%</transmit-delay>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/transmit-delay


curl -v -X PUT -d "<key-activation-wait-time>%common-def:time-interval-sec%</key-activation-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/md5-authentication/key-activation-wait-time


curl -v -X PUT -d "[DO NOT USE]<key-id><key-id>%uint32%</key-id><key>%ospf-auth-psswd-string%</key></key-id>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/md5-authentication/key-id


curl -v -X PUT -d "<cost>%uint32%</cost>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/cost


curl -v -X PUT -d "<network>%enumeration%</network>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/network


curl -v -X PUT -d "<ldp-sync>%enumeration%</ldp-sync>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/ldp-sync


curl -v -X PUT -d "<all-out>true</all-out>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/database-filter/all-out


curl -v -X PUT -d "<all-external>%database-filter-options%</all-external>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/database-filter/all-external


curl -v -X PUT -d "<all-summary-external>%database-filter-options%</all-summary-external>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/database-filter/all-summary-external


curl -v -X PUT -d "<mtu-ignore>true</mtu-ignore>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/mtu-ignore


curl -v -X PUT -d "<active>true</active>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/active


curl -v -X PUT -d "<passive>true</passive>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/passive


curl -v -X PUT -d "<priority>%uint32%</priority>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/priority


curl -v -X PUT -d "<intf-bfd-enable>true</intf-bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/ospf/bfd/intf-bfd-enable


curl -v -X PUT -d "[DO NOT USE]<area>%ospf-area-id%</area>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/area


curl -v -X PUT -d "<auth-change-wait-time>%common-def:time-interval-sec%</auth-change-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/auth-change-wait-time


curl -v -X PUT -d "[DO NOT USE]<no-encrypt-auth-key>%ospf-auth-psswd-string%</no-encrypt-auth-key>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/authentication-key/no-encrypt-auth-key


curl -v -X PUT -d "[DO NOT USE]<key-chain>%ospf-keychain-string%</key-chain>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/authentication/key-chain


curl -v -X PUT -d "<hello-interval>%common-def:time-interval-sec%</hello-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/hello-interval


curl -v -X PUT -d "<dead-interval>%common-def:time-interval-sec%</dead-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/dead-interval


curl -v -X PUT -d "<retransmit-interval>%common-def:time-interval-sec%</retransmit-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/retransmit-interval


curl -v -X PUT -d "<transmit-delay>%common-def:time-interval-sec%</transmit-delay>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/transmit-delay


curl -v -X PUT -d "<key-activation-wait-time>%common-def:time-interval-sec%</key-activation-wait-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/md5-authentication/key-activation-wait-time


curl -v -X PUT -d "[DO NOT USE]<key-id><key-id>%uint32%</key-id><key>%ospf-auth-psswd-string%</key></key-id>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/md5-authentication/key-id


curl -v -X PUT -d "<cost>%uint32%</cost>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/cost


curl -v -X PUT -d "<network>%enumeration%</network>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/network


curl -v -X PUT -d "<ldp-sync>%enumeration%</ldp-sync>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/ldp-sync


curl -v -X PUT -d "<all-out>true</all-out>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/database-filter/all-out


curl -v -X PUT -d "<all-external>%database-filter-options%</all-external>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/database-filter/all-external


curl -v -X PUT -d "<all-summary-external>%database-filter-options%</all-summary-external>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/database-filter/all-summary-external


curl -v -X PUT -d "<mtu-ignore>true</mtu-ignore>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/mtu-ignore


curl -v -X PUT -d "<active>true</active>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/active


curl -v -X PUT -d "<passive>true</passive>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/passive


curl -v -X PUT -d "<priority>%uint32%</priority>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/priority


curl -v -X PUT -d "<intf-bfd-enable>true</intf-bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/ospf/bfd/intf-bfd-enable