********************************************************************************
* Copyright (C) 2019-2024 by Extreme Networks , Inc.                           *
* This file is part of rBreeze Dump                                            *
*                                                                              *
* Author: Pradeep Raj.                                                         *
*                                                                              *
*                                                                              *
* Directions to Use:                                                           *
* 1. Replace all the values enclosed in the "%" with                           *
*    the values to be configured. The string present with in the braces        * 
*    indicates its type.                                                       *
* 2. To pass "" in the request replace the " with %22.                         *
* 3. To pass multiple keys in the URI enclose seperate them with %2c or        *
*    comma(",").                                                               *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
*                                                                              *
* Disclaimer:                                                                  *
* 1. The queries mentioned here do not have a one-to-one correlation with CLI. *
* 2. The queries inferred here are based on an automated tool and are not      *
*    gauranteed to work. Its the functional teams responsibilty to ensure its  *
*    working.                                                                  *
* 3. In case if you find any discrepancy you can always contact the author to  *
*    get it fixed.                                                             *
* 4. Avoid using the requests with [DO NOT USE] tag in the payload. These could*
*    be defective because of the tailf extensions they have.                   *
********************************************************************************

curl -v -X PUT -d "<isis>true</isis>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ip/router/isis


curl -v -X PUT -d "<isis>true</isis>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/ipv6/router/isis


curl -v -X PUT -d "[DO NOT USE]<intf-isis />"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/intf-isis


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/auth-check/level-1/disable


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/auth-check/level-2/disable


curl -v -X PUT -d "<reverse-metric />"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/reverse-metric


curl -v -X PUT -d "<rev-metric-val>%uint32%</rev-metric-val>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/reverse-metric/rev-metric-val


curl -v -X PUT -d "<whole-lan>true</whole-lan>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/reverse-metric/whole-lan


curl -v -X PUT -d "<te-def-metric>true</te-def-metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/reverse-metric/te-def-metric


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/auth-mode/md5/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/auth-mode/md5/level-2


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/hello/padding/disable


curl -v -X PUT -d "<circuit-type>%enumeration%</circuit-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/circuit-type


curl -v -X PUT -d "<point-to-point>true</point-to-point>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/point-to-point


curl -v -X PUT -d "<passive>true</passive>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/passive


curl -v -X PUT -d "<level-1>%uint32%</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/priority/level-1


curl -v -X PUT -d "<level-2>%uint32%</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/priority/level-2


curl -v -X PUT -d "<interface-bfd-enable>true</interface-bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/bfd/interface-bfd-enable


curl -v -X PUT -d "<ldp-sync>%enumeration%</ldp-sync>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ethernet/%name%/isis/ldp-sync


curl -v -X PUT -d "[DO NOT USE]<isis />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/auth-check/level-1/disable


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/auth-check/level-2/disable


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/auth-mode/md5/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/auth-mode/md5/level-2


curl -v -X PUT -d "<level-1>%string%</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/auth-key/level-1


curl -v -X PUT -d "<level-2>%string%</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/auth-key/level-2


curl -v -X PUT -d "<bfd-global-enable>true</bfd-global-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/bfd/bfd-global-enable


curl -v -X PUT -d "<holdover-interval>%uint16%</holdover-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/bfd/holdover-interval


curl -v -X PUT -d "<csnp-interval>%uint32%</csnp-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/csnp-interval


curl -v -X PUT -d "<disable-inc-stct-spf-opt>true</disable-inc-stct-spf-opt>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/disable-inc-stct-spf-opt


curl -v -X PUT -d "<disable-incremental-spf-opt>true</disable-incremental-spf-opt>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/disable-incremental-spf-opt


curl -v -X PUT -d "<disable-partial-spf-opt>true</disable-partial-spf-opt>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/disable-partial-spf-opt


curl -v -X PUT -d "<fast-flood />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/fast-flood


curl -v -X PUT -d "<fast-flood-value>%uint32%</fast-flood-value>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/fast-flood/fast-flood-value


curl -v -X PUT -d "<helper-disable>true</helper-disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/graceful-restart/helper-disable


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/hello/padding/point-to-point/disable


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/hello/padding/disable


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/hostname/disable


curl -v -X PUT -d "<is-type>%enumeration%</is-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/is-type


curl -v -X PUT -d "<adjacency>true</adjacency>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/log/adjacency


curl -v -X PUT -d "<invalid-lsp-packets>true</invalid-lsp-packets>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/log/invalid-lsp-packets


curl -v -X PUT -d "<lsp-gen-interval>%uint32%</lsp-gen-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/lsp-gen-interval


curl -v -X PUT -d "<lsp-interval>%uint32%</lsp-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/lsp-interval


curl -v -X PUT -d "<lsp-refresh-interval>%uint32%</lsp-refresh-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/lsp-refresh-interval


curl -v -X PUT -d "<max-lsp-lifetime>%uint32%</max-lsp-lifetime>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/max-lsp-lifetime


curl -v -X PUT -d "<nonstop-routing>true</nonstop-routing>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/nonstop-routing


curl -v -X PUT -d "<pspf-max-hold-time>%uint32%</pspf-max-hold-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/partial-spf-interval/pspf-max-hold-time


curl -v -X PUT -d "<pspf-init-delay>%uint32%</pspf-init-delay>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/partial-spf-interval/pspf-init-delay


curl -v -X PUT -d "<pspf-hold-time>%uint32%</pspf-hold-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/partial-spf-interval/pspf-hold-time


curl -v -X PUT -d "<retransmit-interval>%uint32%</retransmit-interval>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/retransmit-interval


curl -v -X PUT -d "<nsr>true</nsr>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/set-debug/nsr


curl -v -X PUT -d "<set-overload-bit />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/set-overload-bit


curl -v -X PUT -d "<on-startup-overloadtime>%uint32%</on-startup-overloadtime>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/set-overload-bit/on-startup/on-startup-overloadtime


curl -v -X PUT -d "<wait-for-bgp-value>%uint32%</wait-for-bgp-value>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/set-overload-bit/on-startup/wait-for-bgp-value


curl -v -X PUT -d "<wait-for-bgp />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/set-overload-bit/on-startup/wait-for-bgp


curl -v -X PUT -d "<reverse-metric />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/reverse-metric


curl -v -X PUT -d "<tlv-type>%uint16%</tlv-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/reverse-metric/tlv-type


curl -v -X PUT -d "<rev-metric-val>%uint32%</rev-metric-val>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/reverse-metric/rev-metric-val


curl -v -X PUT -d "<whole-lan>true</whole-lan>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/reverse-metric/whole-lan


curl -v -X PUT -d "<te-def-metric>true</te-def-metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/reverse-metric/te-def-metric


curl -v -X PUT -d "<unicast />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/metric-style/wide/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/metric-style/wide/level-2


curl -v -X PUT -d "<Level-2>true</Level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/summary-address/%summary-ip%/%summary-ip-mask%/Level-2


curl -v -X PUT -d "<ldp-sync />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/ldp-sync


curl -v -X PUT -d "<hold-down>%uint32%</hold-down>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/ldp-sync/hold-down


curl -v -X PUT -d "<level-1>%uint32%</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/default-link-metric/level-1


curl -v -X PUT -d "<level-2>%uint32%</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/default-link-metric/level-2


curl -v -X PUT -d "<default-information-originate />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/default-information-originate


curl -v -X PUT -d "<route-map>%string%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/default-information-originate/route-map


curl -v -X PUT -d "<default-metric>%uint32%</default-metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/default-metric


curl -v -X PUT -d "<distance>%uint32%</distance>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/distance


curl -v -X PUT -d "<maximum-paths>%uint32%</maximum-paths>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/maximum-paths


curl -v -X PUT -d "<connected />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/connected


curl -v -X PUT -d "<metric>%conn-metric%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/connected/metric


curl -v -X PUT -d "<route-map>%rmap-type%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/connected/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/connected/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/connected/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/connected/level-1-2


curl -v -X PUT -d "<metric-type>%is-metric-type-t%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/connected/metric-type


curl -v -X PUT -d "<ospf />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf


curl -v -X PUT -d "<internal>true</internal>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/match/internal


curl -v -X PUT -d "<external1>true</external1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/match/external1


curl -v -X PUT -d "<external2>true</external2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/match/external2


curl -v -X PUT -d "<metric>%conn-metric%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/metric


curl -v -X PUT -d "<route-map>%rmap-type%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/level-1-2


curl -v -X PUT -d "<metric-type>%is-metric-type-t%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/ospf/metric-type


curl -v -X PUT -d "<static />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/static


curl -v -X PUT -d "<metric>%conn-metric%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/static/metric


curl -v -X PUT -d "<route-map>%rmap-type%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/static/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/static/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/static/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/static/level-1-2


curl -v -X PUT -d "<metric-type>%is-metric-type-t%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/static/metric-type


curl -v -X PUT -d "<bgp />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/bgp


curl -v -X PUT -d "<metric>%conn-metric%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/bgp/metric


curl -v -X PUT -d "<route-map>%common-def:name-string63%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/bgp/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/bgp/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/bgp/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/bgp/level-1-2


curl -v -X PUT -d "<metric-type>%is-metric-type-t%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/bgp/metric-type


curl -v -X PUT -d "<prefix-list>%string%</prefix-list>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/isis/level-1/into/level-2/prefix-list


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/isis/level-1/into/level-2/disable


curl -v -X PUT -d "<level-1 />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/isis/level-2/into/level-1


curl -v -X PUT -d "<prefix-list>%string%</prefix-list>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv4/unicast/redistribute/isis/level-2/into/level-1/prefix-list


curl -v -X PUT -d "<unicast />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast


curl -v -X PUT -d "<disable-adjacency-check>true</disable-adjacency-check>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/disable-adjacency-check


curl -v -X PUT -d "<Level-2>true</Level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/summary-prefix/%summary-prefix-ipv6%/Level-2


curl -v -X PUT -d "<level-1>%uint32%</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/default-link-metric/level-1


curl -v -X PUT -d "<level-2>%uint32%</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/default-link-metric/level-2


curl -v -X PUT -d "<multi-topology />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/multi-topology


curl -v -X PUT -d "<transition>true</transition>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/multi-topology/transition


curl -v -X PUT -d "<pspf-max-hold-time>%uint32%</pspf-max-hold-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/partial-spf-interval/pspf-max-hold-time


curl -v -X PUT -d "<pspf-init-delay>%uint32%</pspf-init-delay>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/partial-spf-interval/pspf-init-delay


curl -v -X PUT -d "<pspf-hold-time>%uint32%</pspf-hold-time>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/partial-spf-interval/pspf-hold-time


curl -v -X PUT -d "<default-information-originate />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/default-information-originate


curl -v -X PUT -d "<route-map>%string%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/default-information-originate/route-map


curl -v -X PUT -d "<default-metric>%uint32%</default-metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/default-metric


curl -v -X PUT -d "<distance>%uint32%</distance>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/distance


curl -v -X PUT -d "<maximum-paths>%uint32%</maximum-paths>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/maximum-paths


curl -v -X PUT -d "<connected />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/connected


curl -v -X PUT -d "<metric>%conn-metric%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/connected/metric


curl -v -X PUT -d "<route-map>%rmap-type%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/connected/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/connected/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/connected/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/connected/level-1-2


curl -v -X PUT -d "<metric-type>%is-metric-type-t%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/connected/metric-type


curl -v -X PUT -d "<ospf />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf


curl -v -X PUT -d "<internal>true</internal>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/match/internal


curl -v -X PUT -d "<external1>true</external1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/match/external1


curl -v -X PUT -d "<external2>true</external2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/match/external2


curl -v -X PUT -d "<metric>%conn-metric%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/metric


curl -v -X PUT -d "<route-map>%rmap-type%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/level-1-2


curl -v -X PUT -d "<metric-type>%is-metric-type-t%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/ospf/metric-type


curl -v -X PUT -d "<static />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/static


curl -v -X PUT -d "<metric>%conn-metric%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/static/metric


curl -v -X PUT -d "<route-map>%rmap-type%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/static/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/static/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/static/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/static/level-1-2


curl -v -X PUT -d "<metric-type>%is-metric-type-t%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/static/metric-type


curl -v -X PUT -d "<bgp />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/bgp


curl -v -X PUT -d "<metric>%conn-metric%</metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/bgp/metric


curl -v -X PUT -d "<route-map>%common-def:name-string63%</route-map>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/bgp/route-map


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/bgp/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/bgp/level-2


curl -v -X PUT -d "<level-1-2>true</level-1-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/bgp/level-1-2


curl -v -X PUT -d "<metric-type>%is-metric-type-t%</metric-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/bgp/metric-type


curl -v -X PUT -d "<prefix-list>%string%</prefix-list>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/isis/level-1/into/level-2/prefix-list


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/isis/level-1/into/level-2/disable


curl -v -X PUT -d "<level-1 />"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/isis/level-2/into/level-1


curl -v -X PUT -d "<prefix-list>%string%</prefix-list>"  -u admin:password http://%ipaddress%:80/rest/config/running/router/isis/address-family/ipv6/unicast/redistribute/isis/level-2/into/level-1/prefix-list


curl -v -X PUT -d "<isis>true</isis>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ip/router/isis


curl -v -X PUT -d "<isis>true</isis>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/ipv6/router/isis


curl -v -X PUT -d "<isis>true</isis>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ip/router/isis


curl -v -X PUT -d "<isis>true</isis>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/ipv6/router/isis


curl -v -X PUT -d "<isis>true</isis>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ip/router/isis


curl -v -X PUT -d "<isis>true</isis>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/ipv6/router/isis


curl -v -X PUT -d "[DO NOT USE]<intf-isis />"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/intf-isis


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/auth-check/level-1/disable


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/auth-check/level-2/disable


curl -v -X PUT -d "<reverse-metric />"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/reverse-metric


curl -v -X PUT -d "<rev-metric-val>%uint32%</rev-metric-val>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/reverse-metric/rev-metric-val


curl -v -X PUT -d "<whole-lan>true</whole-lan>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/reverse-metric/whole-lan


curl -v -X PUT -d "<te-def-metric>true</te-def-metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/reverse-metric/te-def-metric


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/auth-mode/md5/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/auth-mode/md5/level-2


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/hello/padding/disable


curl -v -X PUT -d "<circuit-type>%enumeration%</circuit-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/circuit-type


curl -v -X PUT -d "<point-to-point>true</point-to-point>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/point-to-point


curl -v -X PUT -d "<passive>true</passive>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/passive


curl -v -X PUT -d "<level-1>%uint32%</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/priority/level-1


curl -v -X PUT -d "<level-2>%uint32%</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/priority/level-2


curl -v -X PUT -d "<interface-bfd-enable>true</interface-bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/bfd/interface-bfd-enable


curl -v -X PUT -d "<ldp-sync>%enumeration%</ldp-sync>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Ve/%name%/isis/ldp-sync


curl -v -X PUT -d "[DO NOT USE]<intf-isis />"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/intf-isis


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/auth-check/level-1/disable


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/auth-check/level-2/disable


curl -v -X PUT -d "<reverse-metric />"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/reverse-metric


curl -v -X PUT -d "<rev-metric-val>%uint32%</rev-metric-val>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/reverse-metric/rev-metric-val


curl -v -X PUT -d "<whole-lan>true</whole-lan>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/reverse-metric/whole-lan


curl -v -X PUT -d "<te-def-metric>true</te-def-metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/reverse-metric/te-def-metric


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/auth-mode/md5/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/auth-mode/md5/level-2


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/hello/padding/disable


curl -v -X PUT -d "<circuit-type>%enumeration%</circuit-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/circuit-type


curl -v -X PUT -d "<point-to-point>true</point-to-point>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/point-to-point


curl -v -X PUT -d "<passive>true</passive>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/passive


curl -v -X PUT -d "<level-1>%uint32%</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/priority/level-1


curl -v -X PUT -d "<level-2>%uint32%</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/priority/level-2


curl -v -X PUT -d "<interface-bfd-enable>true</interface-bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/bfd/interface-bfd-enable


curl -v -X PUT -d "<ldp-sync>%enumeration%</ldp-sync>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Port-channel/%name%/isis/ldp-sync


curl -v -X PUT -d "[DO NOT USE]<intf-isis />"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/intf-isis


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/auth-check/level-1/disable


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/auth-check/level-2/disable


curl -v -X PUT -d "<reverse-metric />"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/reverse-metric


curl -v -X PUT -d "<rev-metric-val>%uint32%</rev-metric-val>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/reverse-metric/rev-metric-val


curl -v -X PUT -d "<whole-lan>true</whole-lan>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/reverse-metric/whole-lan


curl -v -X PUT -d "<te-def-metric>true</te-def-metric>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/reverse-metric/te-def-metric


curl -v -X PUT -d "<level-1>true</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/auth-mode/md5/level-1


curl -v -X PUT -d "<level-2>true</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/auth-mode/md5/level-2


curl -v -X PUT -d "<disable>true</disable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/hello/padding/disable


curl -v -X PUT -d "<circuit-type>%enumeration%</circuit-type>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/circuit-type


curl -v -X PUT -d "<point-to-point>true</point-to-point>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/point-to-point


curl -v -X PUT -d "<passive>true</passive>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/passive


curl -v -X PUT -d "<level-1>%uint32%</level-1>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/priority/level-1


curl -v -X PUT -d "<level-2>%uint32%</level-2>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/priority/level-2


curl -v -X PUT -d "<interface-bfd-enable>true</interface-bfd-enable>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/bfd/interface-bfd-enable


curl -v -X PUT -d "<ldp-sync>%enumeration%</ldp-sync>"  -u admin:password http://%ipaddress%:80/rest/config/running/interface/Loopback/%id%/isis/ldp-sync